RCT BRK-TV32-75T 32–75" Slim Tilt TV Wall Mount - 75kg

At a Glance

The RCT BRK-TV32-75T is a heavy-duty slim tilt wall mount for compatible flat and curved televisions from 32 to 75 inches.

It supports televisions weighing up to 75kg, accommodates compatible VESA mounting patterns up to 400 × 400mm and provides up to 8 degrees of downward tilt.

The slim 42mm profile positions the television close to the wall, while the open-frame design supports ventilation and access to cables and television connections.

Short Description

The RCT BRK-TV32-75T is a slim tilting wall mount for compatible 32–75-inch flat and curved televisions weighing up to 75kg.

It supports VESA mounting patterns from 100 × 100mm to 400 × 400mm, provides 0° to -8° tilt and positions the television approximately 42mm from the wall.

Why Choose This RCT TV Mount

The BRK-TV32-75T provides a strong and space-efficient mounting solution for medium and large televisions.

Its steel construction supports compatible televisions weighing up to 75kg, while the adjustable mounting rails accommodate a wide range of common VESA configurations.

The downward tilt function is useful when the television is positioned above normal eye level, while the slim fixed-wall design creates a clean installed appearance.

Recommended Use Cases

• Lounges and entertainment rooms
• Bedroom televisions
• Flat-screen televisions
• Compatible curved televisions
• Boardrooms and meeting rooms
• Office presentation screens
• Reception areas
• Training facilities
• Hospitality environments
• Retail displays
• Commercial installations
• Above-eye-level television mounting
• Close-to-wall installations

Product Description

The RCT BRK-TV32-75T is a heavy-duty tilting television wall mount designed for compatible screens measuring between 32 and 75 inches.

It supports televisions weighing up to 75kg and has been strength tested to four times its approved load capacity.

The mounting system supports VESA and compatible universal mounting-hole patterns from 100 × 100mm to 400 × 400mm.

Its fixed-wall design positions a compatible television approximately 42mm from the wall, creating a slim appearance while providing access to cables and connections through the open mounting structure.

The mount provides a tilt range from 0° to -8°, allowing the television to be angled downward when installed above the normal viewing position.

Detachable vertical mounting rails attach to the television before it is lifted onto the wall plate. Pull-release cords allow the lower rail locks to be disengaged when the television needs to be removed.

The mount is manufactured from cold-rolled steel with a fine-texture black powder-coated finish.

It can be installed on a structurally suitable solid wall or compatible double-stud structure with 406mm or 16-inch stud spacing.

Key Features

• Designed for compatible 32–75-inch televisions
• Supports flat televisions
• Supports compatible curved televisions
• Maximum weight capacity of 75kg
• VESA compatibility from 100 × 100mm to 400 × 400mm
• Slim 42mm wall profile
• 0° to -8° downward tilt
• Heavy-duty steel construction
• Fine-texture black finish
• Powder-coated surface
• Fixed wall-plate design
• Detachable television mounting rails
• Pull-release rail-locking system
• Open-frame construction
• Supports ventilation around the television
• Provides easier access to cables and connections
• Hook-on bubble level included
• Suitable for solid-wall installation
• Supports compatible 406mm double-stud structures
• Strength tested to four times the approved load capacity
• Television and wall-mounting hardware included
• Installation manual included

Specifications

Supported VESA Patterns

Compatible mounting patterns include:

• 100 × 100mm
• 100 × 150mm
• 150 × 100mm
• 100 × 200mm
• 200 × 100mm
• 150 × 150mm
• 200 × 200mm
• 300 × 200mm
• 400 × 200mm
• 300 × 300mm
• 400 × 300mm
• 400 × 400mm

The television’s horizontal and vertical mounting-hole spacing must match a supported configuration.

Tilt Adjustment

The BRK-TV32-75T provides:

• Maximum upright position: 0°
• Maximum downward tilt: 8°

The downward tilt function can improve the viewing angle when the television is mounted above normal seated or standing eye level.

This mount does not provide left or right swivel adjustment.

Slim Wall Profile

The mount positions a compatible television approximately 42mm from the wall.

The actual available clearance depends on:

• Television thickness
• Rear-panel shape
• Mounting-point position
• Spacer requirements
• Cable connectors
• Curved television construction
• Recessed mounting points

Right-angled or low-profile cable connectors may be required where the television’s ports face directly towards the wall.

Flat and Curved Television Support

The BRK-TV32-75T supports compatible flat and curved televisions.

The supplied spacers can assist with televisions featuring:

• Curved rear panels
• Recessed mounting points
• Raised mounting areas
• Uneven rear surfaces
• Obstructions around the mounting holes

The correct mounting-screw length and spacer combination must be selected carefully.

Screws that are too long may damage the television. Screws that are too short may not secure the television safely.

Compatibility

The RCT BRK-TV32-75T is suitable for a television only when all the following requirements are met:

• Screen size is between 32 and 75 inches
• Television weight does not exceed 75kg
• Mounting-hole arrangement matches a supported VESA configuration
• Mounting pattern does not exceed 400 × 400mm
• The television supports wall mounting
• The rear mounting surface can accommodate the supplied rails
• Suitable mounting screws are available
• The supporting wall is structurally suitable
• The installation position allows sufficient tilt and cable clearance

Screen size alone does not confirm compatibility. The television’s weight, VESA pattern, mounting-screw requirements and rear-panel design must also be checked.

Wall Compatibility

The mount is designed for installation on:

• A structurally suitable solid masonry wall
• A compatible double-stud wall structure
• Double studs positioned at approximately 406mm or 16-inch centres

The mount must not be fixed directly to unsupported drywall, plasterboard or another non-structural surface.

Wall fasteners must be appropriate for the wall material and combined weight of the television and mount.

Installation Requirements

Installation requires suitable tools, accurate measurements and a structurally sound supporting wall.

Before installation:

• Confirm the television’s weight
• Measure the VESA mounting-hole spacing
• Check the required mounting-screw diameter
• Check the permitted screw insertion depth
• Identify the wall construction
• Locate supporting studs where applicable
• Check for concealed wiring and plumbing
• Confirm that cables and connectors will fit behind the television
• Ensure the installation position provides adequate ventilation
• Check that all mounting components are present and undamaged

Installation of a large television should be completed by at least two people.

Professional installation is recommended.

Installation and Safety Notes

• Do not exceed the maximum supported weight of 75kg
• Do not install the mount on an unsuitable or damaged wall
• Do not attach the mount directly to unsupported drywall
• Use suitable fasteners for the supporting wall material
• Use at least two people to lift and position the television
• Never lift the television by its screen
• Do not use screws that are too long
• Do not use screws that are too short to engage securely
• Do not overtighten screws fitted into the television
• Confirm that the mounting rails are properly secured
• Check that the lower locking mechanism has engaged
• Keep cables away from sharp edges
• Ensure ventilation openings remain unobstructed
• Check the mount and fasteners periodically
• Keep unused screws and small components away from children

Incorrect installation may result in equipment damage, serious injury or both.

What’s in the Box

• RCT BRK-TV32-75T Tilt TV Wall Mount
• 2 × Detachable Television Mounting Rails
• Hook-On Bubble Level
• 4mm Allen Key
• Wall-Mounting Bolts
• Wall Anchors
• Wall-Mounting Washers
• M6 Television Mounting Screws
• M8 Television Mounting Screws
• Television Mounting Washers
• Short Spacers
• Long Spacers
• Installation Manual

Warranty

12-Month Limited Warranty

Warranty coverage does not include damage caused by incorrect installation, overloading, an unsuitable mounting surface, misuse, unauthorised modification or failure to follow the installation instructions.