The EcoFlow DELTA 2 is a 1024Wh portable power station with 1800W AC output, expandable battery capacity, fast AC and solar charging, a long-life LFP battery and smart app control for home backup, travel, camping and off-grid power.

Product Description

The EcoFlow DELTA 2 is a portable power station designed to provide dependable backup and mobile power for homes, offices, workshops, camping trips, caravans and other off-grid applications.

Its 1024Wh battery capacity provides stored power for compatible appliances and electronic devices during power outages or when mains electricity is unavailable.

The DELTA 2 delivers up to 1800W of continuous AC output, with a surge output of up to 2700W. EcoFlow X-Boost technology allows the power station to operate selected compatible appliances with higher rated power requirements.

The battery capacity can be expanded using one compatible EcoFlow DELTA 2 Smart Extra Battery to reach 2048Wh. It can also be connected to a compatible EcoFlow DELTA Max Smart Extra Battery for a total capacity of up to 3040Wh.

EcoFlow X-Stream charging technology supports an AC charging input of up to 1200W. Under suitable conditions, the DELTA 2 can recharge from 0% to approximately 80% in around 50 minutes.

The built-in solar charging input supports up to 500W from compatible solar panels. Charging time depends on solar-panel output, weather conditions, panel positioning and available sunlight.

Its lithium iron phosphate battery is rated for approximately 3000 complete charge cycles before reaching around 80% of its original capacity. A built-in battery management system monitors voltage, current and temperature during operation.

The DELTA 2 can function as an emergency power supply for compatible connected devices when mains power is interrupted. It is not a replacement for a dedicated online UPS where zero-transfer-time operation is required.

Wi-Fi and Bluetooth connectivity allow the power station to be monitored and controlled through the EcoFlow mobile application. Users can view battery levels, input and output power, charging information and selected system settings.

Key Features

• 1024Wh battery capacity
• 1800W continuous AC output
• Surge output of up to 2700W
• EcoFlow X-Boost technology
• Supports compatible devices rated up to 2200W with X-Boost
• Expandable battery capacity
• Expands to 2048Wh with a DELTA 2 Smart Extra Battery
• Expands to 3040Wh with a DELTA Max Smart Extra Battery
• Lithium iron phosphate battery chemistry
• Rated for approximately 3000 cycles to at least 80% capacity
• Up to 1200W AC charging input
• Recharges from 0% to approximately 80% in around 50 minutes
• Up to 500W solar charging input
• Supports 12V and 24V vehicle charging
• Multiple South African AC power outlets
• USB-A charging ports
• USB-A fast-charging ports
• Two USB-C ports with up to 100W output
• 12V car power output
• Two DC5521 outputs
• Emergency power supply functionality
• Built-in battery management system
• Wi-Fi connectivity
• Bluetooth connectivity
• EcoFlow mobile application support
• Integrated display for power and battery information
• Portable design with integrated carrying handles
• Suitable for home backup, offices, camping and mobile power

Specifications

Compatibility

The EcoFlow DELTA 2 is suitable for powering compatible household, office, travel and outdoor equipment within its supported output limits, including:

• Wi-Fi routers
• Televisions
• Laptops
• Desktop computers
• Computer monitors
• Mobile phones
• Tablets
• Lights
• Fans
• Gaming consoles
• Projectors
• CPAP machines
• Portable fridges
• Selected refrigerators
• Coffee machines
• Selected kitchen appliances
• Power tools
• Camping equipment
• Other compatible AC, USB or 12V devices

The combined continuous power requirement of connected AC appliances should not exceed the DELTA 2’s 1800W rated AC output.

X-Boost can support selected compatible appliances with higher rated power requirements. It may reduce the supplied voltage and is best suited to resistive appliances. It may not be suitable for all sensitive electronic devices.

The DELTA 2 supports one compatible EcoFlow DELTA 2 Smart Extra Battery or one compatible EcoFlow DELTA Max Smart Extra Battery. Extra batteries and connection cables are sold separately unless specifically included in a bundle.

Solar charging requires compatible solar panels and a suitable EcoFlow solar charging cable. The standard DELTA 2 package does not include a solar charging cable unless stated otherwise.

Vehicle charging requires a compatible EcoFlow car charging cable and a suitable 12V or 24V vehicle accessory socket.

Wi-Fi and Bluetooth functions require a compatible mobile device and the EcoFlow application. Remote control through Wi-Fi requires a suitable internet connection.

Emergency power supply performance depends on the connected equipment and installation. Sensitive systems requiring uninterrupted power should be assessed before use.

What’s in the Box

• 1 × EcoFlow DELTA 2 Portable Power Station
• 1 × AC Charging Cable
• 1 × User Manual
• 1 × EcoFlow App Quick Start Guide
• 1 × Warranty Card

The solar charging cable, vehicle charging cable, solar panels and extra batteries are not included unless specifically stated as part of the supplied bundle.

Warranty

Five-Year EcoFlow Limited Manufacturer Warranty

Sustainability

The EcoFlow DELTA 2 uses lithium iron phosphate battery chemistry and is rated for approximately 3000 complete charging cycles before reaching around 80% of its original capacity.

Compatibility with solar charging provides an alternative way to recharge the power station using suitable EcoFlow or compatible solar panels. Its expandable design also allows battery capacity to be increased without replacing the main power station.

The EcoFlow DELTA 2 Smart Extra Battery is a 1024Wh expansion battery designed to increase the capacity of a compatible EcoFlow DELTA 2 or EcoFlow DELTA 3 portable power station.

This product is an extra battery add-on only and cannot be used as a standalone portable power station.

Product Description

The EcoFlow DELTA 2 Smart Extra Battery is designed for customers who want to expand a compatible EcoFlow DELTA 2 or EcoFlow DELTA 3 setup for longer backup power, home-office use, essential appliances, camping, travel and load-shedding support.

When connected to an EcoFlow DELTA 2, the Smart Extra Battery expands the total system capacity from 1024Wh to 2048Wh. This provides additional stored energy for compatible appliances and electronic devices during power outages or off-grid use.

The DELTA 2 and its Smart Extra Battery are designed to charge and discharge together as one connected system. Recharging is managed through the connected portable power station using supported AC, solar or EcoFlow Smart Generator charging methods.

When connected to a DELTA 2 and charged through AC input, the combined system can recharge from approximately 0% to 80% in 70 minutes and from approximately 0% to 100% in 120 minutes under suitable conditions.

The battery uses long-life lithium iron phosphate chemistry and is rated for approximately 3000 complete charging cycles before reaching around 80% of its original capacity.

An integrated display provides access to battery status, remaining charging time and estimated operating time. Battery information can also be monitored through the EcoFlow App when the Smart Extra Battery is connected to a compatible EcoFlow portable power station.

The built-in storage compartment provides convenient space for storing compatible cables and small accessories when the battery is not being transported or used.

This product does not include a portable power station and does not provide standalone AC, USB or DC power outputs.

Key Features

• 1024Wh smart expansion battery
• Compatible with EcoFlow DELTA 2
• Compatible with EcoFlow DELTA 3
• Expands the DELTA 2 system capacity to 2048Wh
• Charges and discharges with the connected power station
• Supports charging through the connected EcoFlow system
• Supports compatible AC charging
• Supports compatible solar charging
• Supports compatible EcoFlow Smart Generator charging
• Recharges from approximately 0% to 80% in 70 minutes with DELTA 2
• Recharges from approximately 0% to 100% in 120 minutes with DELTA 2
• Lithium iron phosphate battery chemistry
• Approximately 3000 cycles to at least 80% capacity
• Integrated battery-status display
• EcoFlow App battery-status monitoring
• Internal accessory-storage compartment
• Includes the DELTA 2 Extra Battery Cable
• Suitable for home backup and load-shedding support
• Suitable for work-from-home setups
• Suitable for camping and travel
• Extra battery add-on only
• Cannot be used independently
• Does not include standalone output ports
• Not compatible with EcoFlow DELTA 2 Max

Specifications

Compatibility

Compatible with:

• EcoFlow DELTA 2 Portable Power Station
• EcoFlow DELTA 3 Portable Power Station

When connected to an EcoFlow DELTA 2, the Smart Extra Battery increases the total available system capacity to 2048Wh.

This product is an expansion battery only. It cannot operate independently and must be connected to a compatible EcoFlow portable power station using the supplied extra battery cable.

The Smart Extra Battery does not include standalone AC, USB or DC output ports. Devices must be connected to the compatible EcoFlow portable power station rather than directly to the battery.

The battery charges and discharges together with the connected power station. Available charging methods and charging performance depend on the connected model, charging source, battery level, temperature and operating conditions.

The EcoFlow App can display battery information when the Smart Extra Battery is connected to a compatible power station with app connectivity.

This Smart Extra Battery is not compatible with the EcoFlow DELTA 2 Max Portable Power Station.

Do not connect or disconnect the Smart Extra Battery while the system is charging or discharging. Switch off both devices before connecting or removing the extra battery cable.

What’s in the Box

• 1 × EcoFlow DELTA 2 Smart Extra Battery
• 1 × DELTA 2 Extra Battery Cable
• 1 × User Manual
• 1 × Warranty Card

A compatible EcoFlow portable power station is not included.

Warranty

Five-Year EcoFlow Limited Manufacturer Warranty

Sustainability

The EcoFlow DELTA 2 Smart Extra Battery uses long-life lithium iron phosphate battery chemistry and is rated for approximately 3000 complete charging cycles before reaching around 80% of its original capacity.

Its modular design allows customers to increase the capacity of an existing compatible EcoFlow power station without replacing the main unit. Solar recharging is also supported through the connected compatible EcoFlow system when suitable solar panels and charging accessories are used.

The EcoFlow RIVER 2 Max is a compact 512Wh portable power station with 500W pure sine wave AC output, X-Boost support up to 1000W, fast one-hour charging and long-life LFP battery chemistry for home backup, camping, travel and office use.

Product Description

The EcoFlow RIVER 2 Max is a compact portable power station designed for customers who require more capacity than an entry-level unit while maintaining a lightweight and easy-to-transport design.

Its 512Wh lithium iron phosphate battery provides stored power for compatible routers, laptops, lights, mobile devices, cameras, televisions, small appliances and work-from-home equipment during power interruptions or when mains electricity is unavailable.

The RIVER 2 Max delivers up to 500W of continuous pure sine wave AC output, with surge power of up to 1000W.

EcoFlow X-Boost technology can support selected compatible appliances rated up to approximately 1000W by adjusting the supplied voltage. X-Boost does not increase the normal continuous AC output above 500W.

EcoFlow X-Stream charging technology can recharge the RIVER 2 Max from approximately 0% to 100% in 60 minutes through a compatible AC mains connection.

The long-life LFP battery is rated to retain more than 80% of its original capacity after approximately 3000 complete charging cycles.

The RIVER 2 Max supports multiple charging methods, including AC wall charging, compatible solar charging, vehicle charging and USB-C charging.

Its solar input supports up to 220W from compatible solar panels, while the USB-C port supports up to 100W input and output for compatible laptops, mobile devices and charging equipment.

Emergency Power Supply functionality provides a transfer time of approximately 30 milliseconds when mains electricity is interrupted. Connected equipment must be able to tolerate this transfer time.

Wi-Fi and Bluetooth connectivity allow the RIVER 2 Max to be monitored and controlled through the EcoFlow App. Available functions may include battery monitoring, charging settings, output control, X-Boost settings and firmware updates.

Key Features

• 512Wh portable power station
• 500W continuous pure sine wave AC output
• 1000W surge output
• X-Boost support up to 1000W for selected compatible appliances
• Recharges from approximately 0% to 100% in 60 minutes
• Maximum AC charging input of 660W
• Long-life lithium iron phosphate battery chemistry
• More than 80% battery capacity after approximately 3000 cycles
• Approximately 30ms Emergency Power Supply switchover
• Maximum solar charging input of 220W
• Maximum vehicle charging input of 100W
• USB-C input and output up to 100W
• USB-A charging output
• 12.6V vehicle power output
• Two DC5521 outputs
• Supports AC wall charging
• Supports compatible solar charging
• Supports compatible vehicle charging
• Supports USB-C charging
• Built-in battery management system
• TÜV Rheinland safety certification
• Wi-Fi connectivity
• Bluetooth connectivity
• EcoFlow App monitoring and control
• Integrated LCD status display
• South African-standard AC connectivity
• Compact grab-and-go construction
• Approximately 6kg net weight
• Suitable for home and office backup
• Suitable for camping, travel and outdoor use
• Suitable for routers, laptops, lights and cameras
• Suitable for selected televisions and small appliances

Specifications

Compatibility

The EcoFlow RIVER 2 Max may be suitable for powering or charging compatible home, office, camping and travel devices within its supported output limits, including:

• Wi-Fi routers and fibre equipment
• Laptops
• Smaller computer monitors
• Mobile phones
• Tablets
• LED lights
• Cameras and battery chargers
• Televisions within supported limits
• Gaming consoles within supported limits
• Portable speakers
• Small fans
• Selected kitchen appliances
• Selected office equipment
• Camping equipment
• Caravan electronics
• Travel electronics
• Other compatible AC, USB or 12V devices

The combined continuous AC power requirement of connected devices must remain within the RIVER 2 Max’s 500W rated AC output.

Appliances containing motors, compressors, pumps, transformers or heating elements may require substantially more power during startup. Check both the normal operating and startup requirements before connecting an appliance.

X-Boost can support selected compatible appliances rated up to approximately 1000W by adjusting the supplied voltage.

X-Boost does not increase the RIVER 2 Max’s normal continuous output above 500W and may not be suitable for:

• Voltage-sensitive electronics
• Precision instruments
• Medical equipment
• Appliances with strict voltage requirements
• Selected compressors
• Devices with electronic speed controls
• Equipment requiring stable full-voltage operation

The RIVER 2 Max provides Emergency Power Supply functionality with a transfer time of approximately 30 milliseconds.

The EPS function is not a zero-transfer online UPS and may not be suitable for critical servers, sensitive workstations, life-support equipment, medical devices, security systems or telecommunications equipment requiring uninterrupted power.

Solar charging requires a compatible solar panel and a suitable EcoFlow Solar-to-XT60 or XT60i charging cable. Solar panels and solar charging cables are sold separately unless specifically included in a bundle.

Vehicle charging requires a compatible EcoFlow vehicle-charging cable and a suitable 12V or 24V vehicle accessory socket.

USB-C charging requires a compatible USB-C Power Delivery charger and cable capable of supplying the required charging power.

Wi-Fi and Bluetooth functions require a compatible mobile device and the EcoFlow App. Some functions may require internet access and current product firmware.

Runtime varies according to connected-device wattage, startup requirements, battery level, conversion losses, temperature and operating settings.

What’s in the Box

• 1 × EcoFlow RIVER 2 Max Portable Power Station
• 1 × AC Charging Cable
• 1 × Quick Start Guide

Solar panels, solar charging cables, vehicle-charging cables, USB-C charging equipment and other accessories are sold separately unless specifically included in the selected bundle.

Warranty

Five-Year EcoFlow Limited Manufacturer Warranty

Sustainability

The EcoFlow RIVER 2 Max uses long-life lithium iron phosphate battery chemistry and is rated to retain more than 80% of its original capacity after approximately 3000 complete charging cycles.

Compatibility with solar charging provides an alternative way to recharge the power station using suitable solar panels. Its rechargeable battery system supplies portable electrical power without the direct operating fumes associated with petrol generators.

The EcoFlow RIVER 2 Pro is a 768Wh portable power station with 800W pure sine wave AC output, X-Boost support up to 1600W, fast 70-minute charging and long-life LFP battery chemistry for home backup, outdoor use, camping and work-from-home support.

Product Description

The EcoFlow RIVER 2 Pro is a compact portable power station designed for customers who need reliable backup power for home, office, travel, camping, outdoor work and everyday electronic devices.

Its 768Wh lithium iron phosphate battery provides stored power for compatible routers, laptops, computer monitors, lights, mobile devices, cameras, televisions and selected small appliances during power interruptions or when mains electricity is unavailable.

The RIVER 2 Pro delivers up to 800W of continuous pure sine wave AC output, with surge power of up to 1600W.

EcoFlow X-Boost technology can support selected compatible appliances rated up to approximately 1600W by adjusting the supplied voltage. X-Boost does not increase the power station’s normal continuous AC output above 800W.

EcoFlow X-Stream charging technology can recharge the RIVER 2 Pro from approximately 0% to 80% in 56 minutes and from 0% to 100% in approximately 70 minutes through a compatible AC mains connection.

The long-life LFP battery is rated to retain more than 80% of its original capacity after approximately 3000 complete charging cycles.

The RIVER 2 Pro supports four charging methods, including AC wall charging, compatible vehicle charging, solar-panel charging and USB-C charging.

Its solar input supports up to 220W from compatible solar panels. Under suitable sunlight conditions, a compatible 220W solar panel can recharge the power station in approximately 3.5 hours.

The USB-C port supports up to 100W input and output for compatible laptops, mobile devices and USB-C Power Delivery charging equipment.

Emergency Power Supply functionality provides an automatic transfer time of less than 30 milliseconds when mains electricity is interrupted. Connected equipment must be able to tolerate this transfer time.

Wi-Fi and Bluetooth connectivity allow the RIVER 2 Pro to be monitored and controlled through the EcoFlow App. Available functions may include battery monitoring, charging-speed adjustment, output control, X-Boost configuration and firmware updates.

Key Features

• 768Wh portable power station
• 800W continuous pure sine wave AC output
• 1600W surge output
• X-Boost support up to 1600W for selected compatible appliances
• Recharges from approximately 0% to 80% in 56 minutes
• Recharges from approximately 0% to 100% in 70 minutes
• Long-life lithium iron phosphate battery chemistry
• More than 80% battery capacity after approximately 3000 cycles
• Less than 30ms Emergency Power Supply switchover
• Maximum solar charging input of 220W
• Solar charging in approximately 3.5 hours with a compatible 220W panel
• Maximum vehicle charging input of 100W
• USB-C input and output up to 100W
• USB-A charging output
• 12.6V vehicle power output
• Two DC5521 power outputs
• Supports AC wall charging
• Supports compatible solar charging
• Supports compatible vehicle charging
• Supports USB-C charging
• Built-in battery management system
• TÜV Rheinland safety certification
• Wi-Fi connectivity
• Bluetooth connectivity
• EcoFlow App monitoring and control
• Integrated LCD status display
• South African-standard AC output configuration
• Approximately 7.8kg net weight
• Compact portable construction
• Suitable for home and office backup
• Suitable for camping, travel and outdoor use
• Suitable for routers, laptops, lights and cameras
• Suitable for selected televisions and small appliances

Specifications

Compatibility

The EcoFlow RIVER 2 Pro may be suitable for powering or charging compatible home, office, travel and outdoor devices within its supported output limits, including:

• Wi-Fi routers and fibre equipment
• Laptops
• Computer monitors
• Desktop computer equipment within supported limits
• Mobile phones
• Tablets
• LED lights
• Cameras and battery chargers
• Televisions within supported limits
• Gaming consoles
• Projectors within supported limits
• Portable refrigerators
• Small fans
• Selected kitchen appliances
• Selected office equipment
• Camping equipment
• Caravan electronics
• Travel electronics
• Other compatible AC, USB or 12V devices

The combined continuous AC power requirement of connected devices must remain within the RIVER 2 Pro’s 800W rated AC output.

Appliances containing motors, pumps, compressors, transformers or heating elements may require substantially more power during startup. Check both the normal operating and startup requirements before connecting an appliance.

X-Boost can support selected compatible appliances rated up to approximately 1600W by adjusting the supplied voltage.

X-Boost does not increase the RIVER 2 Pro’s normal continuous output above 800W and may not be suitable for:

• Voltage-sensitive electronics
• Precision instruments
• Medical equipment
• Appliances with strict voltage requirements
• Selected compressors
• Devices with electronic speed controls
• Equipment requiring stable full-voltage operation

The RIVER 2 Pro provides Emergency Power Supply functionality with an automatic transfer time of less than 30 milliseconds.

The EPS function is not a zero-transfer online UPS and may not be suitable for critical servers, sensitive workstations, life-support equipment, medical devices, security systems or telecommunications equipment requiring uninterrupted power.

Solar charging requires a compatible solar panel and a suitable EcoFlow Solar-to-XT60 or XT60i charging cable. Solar panels and charging cables are sold separately unless specifically included in a bundle.

Vehicle charging requires a compatible EcoFlow vehicle-charging cable and a suitable 12V or 24V vehicle accessory socket.

USB-C charging requires a compatible USB-C Power Delivery charger and cable capable of supplying the required charging power.

Wi-Fi and Bluetooth functions require a compatible mobile device and the EcoFlow App. Some functions may require internet access and current product firmware.

Runtime varies according to connected-device wattage, startup requirements, battery level, conversion losses, temperature and operating settings.

What’s in the Box

• 1 × EcoFlow RIVER 2 Pro Portable Power Station
• 1 × AC Charging Cable
• 1 × Quick Start Guide

Solar panels, solar charging cables, vehicle-charging cables, USB-C charging equipment and other accessories are sold separately unless specifically included in the selected bundle.

Warranty

Five-Year EcoFlow Limited Manufacturer Warranty

Sustainability

The EcoFlow RIVER 2 Pro uses long-life lithium iron phosphate battery chemistry and is rated to retain more than 80% of its original capacity after approximately 3000 complete charging cycles.

Compatibility with solar charging provides an alternative method of recharging the power station using suitable solar panels. Its rechargeable battery system supplies portable electrical power without the direct operating fumes associated with petrol generators.

The EcoFlow RIVER Pro Extra Battery is a 720Wh expansion battery designed exclusively for the compatible EcoFlow RIVER Pro, increasing the total connected system capacity from 720Wh to 1440Wh for longer backup and off-grid runtime.

This product is an extra battery add-on only and cannot be used as a standalone portable power station.

Product Description

The EcoFlow RIVER Pro Extra Battery is designed for customers who already own a compatible EcoFlow RIVER Pro and require additional battery capacity for home backup, camping, travel, outdoor work and light load-shedding support.

When connected to the EcoFlow RIVER Pro, the Extra Battery doubles the total available system capacity from 720Wh to 1440Wh. This provides additional stored energy for compatible devices connected through the RIVER Pro portable power station.

The RIVER Pro and Extra Battery operate as one connected power system. Charging and discharging are managed through the connected RIVER Pro rather than directly through the Extra Battery.

The Extra Battery uses lithium-ion battery chemistry and is rated for approximately 800 complete charging cycles before reaching around 80% of its original capacity.

A dedicated expansion power cable connects the battery to the expansion port on the EcoFlow RIVER Pro. Both devices must be switched off before connecting or disconnecting the cable.

An integrated display provides battery and operating information while the system is in use. The portable design and integrated carrying handle make the Extra Battery suitable for transport between home, office, camping and outdoor locations.

This product does not include AC, USB, vehicle or DC5521 output ports. Appliances and electronic devices must be connected to the compatible EcoFlow RIVER Pro.

The EcoFlow RIVER Pro Extra Battery is designed exclusively for the RIVER Pro and is not compatible with other EcoFlow portable power stations.

Key Features

• 720Wh expansion battery
• Designed exclusively for the EcoFlow RIVER Pro
• Expands the connected system capacity from 720Wh to 1440Wh
• Provides longer runtime for compatible connected devices
• Lithium-ion battery chemistry
• Approximately 800 charging cycles to 80% capacity
• Charges through the connected EcoFlow RIVER Pro
• Discharges together with the connected RIVER Pro
• Dedicated expansion power connection
• Includes the required expansion power cable
• Integrated battery-status display
• Integrated carrying handle
• Compact portable construction
• Approximately 7.3kg net weight
• Suitable for home backup
• Suitable for light load-shedding support
• Suitable for camping and travel
• Suitable for outdoor and mobile work
• Extra battery add-on only
• Cannot operate independently
• Does not include standalone AC outputs
• Does not include standalone USB outputs
• Does not include standalone vehicle or DC outputs
• Power station sold separately
• Not compatible with other EcoFlow power stations

Specifications

Compatibility

Compatible only with:

• EcoFlow RIVER Pro Portable Power Station

When connected to the EcoFlow RIVER Pro, the Extra Battery increases the total available system capacity from 720Wh to 1440Wh.

This product cannot operate independently. It must remain connected to the compatible EcoFlow RIVER Pro during charging and discharging.

Devices cannot be connected directly to the Extra Battery. All appliances and electronics must be connected to the output ports on the EcoFlow RIVER Pro.

The RIVER Pro Extra Battery is not compatible with:

• EcoFlow RIVER
• EcoFlow RIVER Max
• EcoFlow RIVER 2
• EcoFlow RIVER 2 Max
• EcoFlow RIVER 2 Pro
• EcoFlow RIVER 3
• EcoFlow DELTA models
• Other EcoFlow portable power stations

Only one EcoFlow RIVER Pro Extra Battery can be connected to one compatible EcoFlow RIVER Pro.

Switch off both the RIVER Pro and the Extra Battery before connecting or disconnecting the expansion power cable.

Connect the expansion cable securely to the expansion ports on both devices and tighten the connector screws before switching the system on.

For first-time use, fully charge the connected system and confirm that the Extra Battery icon appears on the RIVER Pro display.

Store the Extra Battery in a dry location away from water, excessive heat and direct sunlight.

For extended storage, EcoFlow recommends charging the battery to approximately 30% to 50%, switching it off and storing it at room temperature.

What’s in the Box

• 1 × EcoFlow RIVER Pro Extra Battery
• 1 × Expansion Power Cable
• 1 × User Manual

The EcoFlow RIVER Pro portable power station is not included.

Warranty

Two-Year EcoFlow Limited Manufacturer Warranty

Sustainability

The EcoFlow RIVER Pro Extra Battery allows the capacity of an existing compatible RIVER Pro system to be increased from 720Wh to 1440Wh without replacing the main portable power station.

Its rechargeable lithium-ion battery is rated for approximately 800 complete charging cycles before reaching around 80% of its original capacity.

The EcoFlow RIVER Pro is a 720Wh portable power station with 600W pure sine wave AC output, 1200W surge power, fast charging and expandable capacity up to 1440Wh for home backup, office use, camping, travel and outdoor power.

Product Description

The EcoFlow RIVER Pro is a compact and expandable portable power station designed for home backup, office use, camping, travel, mobile work and light load-shedding support.

Its 720Wh lithium-ion battery provides stored power for compatible routers, laptops, lights, cameras, televisions, mobile devices, portable refrigerators and selected small appliances when mains electricity is unavailable.

The RIVER Pro delivers a continuous pure sine wave AC output of 600W and surge power of up to 1200W. Its two South African-standard AC outlets allow compatible household and electronic devices to be connected within the power station’s supported output limits.

EcoFlow X-Boost technology can operate selected compatible appliances rated between approximately 600W and 1200W by adjusting the supplied voltage. X-Boost does not increase the RIVER Pro’s normal continuous AC output above 600W.

The RIVER Pro can power or charge up to nine compatible devices simultaneously through its AC, USB-A, USB-C, vehicle and DC5521 outputs.

EcoFlow X-Stream charging technology can recharge the battery from approximately 0% to 80% in under one hour. A complete AC recharge takes approximately 96 minutes under suitable conditions.

The battery capacity can be expanded from 720Wh to 1440Wh using a separately sold EcoFlow RIVER Pro Extra Battery and the required expansion cable.

The RIVER Pro supports charging through AC mains power, compatible solar panels and a suitable 12V vehicle accessory socket. Its solar input supports up to 200W from compatible panels.

Emergency Power Supply functionality provides an automatic switchover time of approximately 30 milliseconds when mains electricity is interrupted. Connected devices must be able to tolerate this transfer time.

Wi-Fi connectivity allows the RIVER Pro to be monitored and controlled through the EcoFlow App. Available functions may include battery monitoring, output control, X-Boost settings, charging configuration and firmware updates.

Key Features

• 720Wh portable power station
• 600W continuous pure sine wave AC output
• 1200W surge output
• X-Boost support for selected appliances rated from 600W to 1200W
• Two South African-standard AC outlets
• Powers up to nine compatible devices simultaneously
• Expandable capacity from 720Wh to 1440Wh
• Compatible with the EcoFlow RIVER Pro Extra Battery
• Recharges from approximately 0% to 80% in under one hour
• Full AC recharge in approximately 96 minutes
• Maximum AC charging input of 660W
• Maximum solar charging input of 200W
• Supports compatible vehicle charging
• One USB-C port with up to 100W output
• Two standard USB-A outputs
• One USB-A fast-charging output
• One 13.6V vehicle power output
• Two DC5521 power outputs
• Emergency Power Supply functionality
• Approximately 30ms EPS switchover
• Built-in battery management system
• Wi-Fi connectivity
• EcoFlow App monitoring and control
• Integrated LCD status display
• Approximately 7.6kg net weight
• Integrated carrying handle
• Suitable for home and office backup
• Suitable for camping, travel and outdoor work
• Suitable for light load-shedding support

Specifications

Compatibility

The EcoFlow RIVER Pro may be suitable for powering and charging compatible home, office, camping and travel devices within its supported output limits, including:

• Wi-Fi routers and fibre equipment
• Laptops
• Computer monitors
• Mobile phones
• Tablets
• LED lights
• Televisions
• Cameras and battery chargers
• Portable refrigerators
• Small fans
• Projectors within supported limits
• Selected office equipment
• Camping equipment
• Caravan electronics
• Other compatible AC, USB or 12V devices

The combined continuous AC power requirement of connected equipment must remain within the RIVER Pro’s 600W rated AC output.

Appliances containing motors, compressors, pumps, transformers or heating elements may require substantially more power during startup. Check both the operating and startup power requirements before connecting an appliance.

X-Boost can support selected compatible appliances rated between approximately 600W and 1200W by adjusting the supplied voltage.

X-Boost does not increase the RIVER Pro’s normal continuous AC output above 600W and may not be suitable for:

• Voltage-sensitive electronics
• Precision equipment
• Medical equipment
• Appliances with strict voltage requirements
• Air compressors
• Large refrigerators
• Microwave ovens
• Washing machines
• Air conditioners
• Heavy-duty power tools
• Devices requiring stable full-voltage operation

The RIVER Pro provides Emergency Power Supply operation with a transfer time of approximately 30 milliseconds.

The EPS function is not a zero-transfer online UPS and may not be suitable for critical servers, sensitive workstations, medical equipment, life-support equipment, security systems or specialised telecommunications equipment.

The RIVER Pro can be connected to one compatible EcoFlow RIVER Pro Extra Battery to increase the total capacity from 720Wh to 1440Wh.

The RIVER Pro Extra Battery and expansion cable are sold separately unless specifically included in a bundle.

Solar charging requires compatible solar panels and the correct EcoFlow solar charging cable. Solar panels and charging cables are sold separately unless specifically included.

Vehicle charging requires a suitable 12V vehicle accessory socket. Vehicle charging should normally be performed while the engine is running to reduce the risk of draining the starter battery.

Wi-Fi functions require a compatible mobile device, the EcoFlow App and a suitable network connection.

Runtime varies according to connected-device wattage, startup demand, battery level, conversion losses, temperature and operating conditions.

What’s in the Box

• 1 × EcoFlow RIVER Pro Portable Power Station
• 1 × DC5521-to-DC5525 Cable
• 1 × AC Charging Cable
• 1 × Vehicle-Charging Cable
• 1 × User Manual
• 1 × Warranty Card

The EcoFlow RIVER Pro Extra Battery, expansion cable, solar panels and solar charging accessories are sold separately unless specifically included in a bundle.

Warranty

Two-Year EcoFlow Limited Manufacturer Warranty

Sustainability

The EcoFlow RIVER Pro can be expanded from 720Wh to 1440Wh using a compatible Extra Battery, allowing customers to increase backup capacity without replacing the main power station.

Compatibility with solar charging also provides an alternative way to recharge the unit using suitable solar panels. Its rechargeable battery system provides portable electrical power without the direct operating fumes associated with petrol generators.

The EcoFlow 110W Lightweight Portable Bifacial Solar Panel combines N-Type TOPCon solar cells, up to 25% conversion efficiency, an integrated XT60I-F cable and a foldable adjustable stand for portable charging at home, while travelling or outdoors.

Product Description

The EcoFlow 110W Lightweight Portable Bifacial Solar Panel is a foldable solar charging solution designed for compatible EcoFlow portable power stations and supported solar-input devices.

Its bifacial construction uses a front-facing solar surface to capture direct sunlight and a rear-facing surface to collect reflected ambient light from the surrounding environment.

The panel delivers a rated output of 110W ±5W under Standard Test Conditions. Under EcoFlow’s specified BNPI bifacial test conditions, output can reach up to 122W ±5W.

N-Type TOPCon monocrystalline solar cells provide a conversion efficiency of up to 25%, helping convert available sunlight into usable charging power under suitable conditions.

An integrated 2.5m solar charging cable with an XT60I-F connector supports convenient connection to compatible EcoFlow portable power stations without requiring a separate standard solar charging cable.

The built-in folding support stand can be adjusted between 30° and 60°, allowing the panel angle to be changed according to the sun’s position and the installation environment.

An integrated solar angle guide assists with positioning the panel so that sunlight reaches the front surface at a more effective angle.

The panel weighs approximately 3.3kg and folds down for easier transport and storage between camping trips, road journeys, outdoor projects and emergency charging applications.

Its IP68 rating provides protection against water and dust under specified test conditions, making the panel suitable for temporary outdoor deployment in demanding environments.

Actual charging output depends on sunlight intensity, panel angle, reflected rear-side light, cloud cover, temperature, shading, panel cleanliness, cable losses and the connected device’s solar-input limits.

Key Features

• 110W lightweight portable solar panel
• Bifacial solar-panel construction
• Captures direct sunlight from the front surface
• Captures reflected ambient light from the rear surface
• Rated output of 110W ±5W under STC conditions
• Output up to 122W ±5W under BNPI conditions
• N-Type TOPCon monocrystalline solar cells
• Up to 25% conversion efficiency
• Integrated 2.5m solar charging cable
• XT60I-F connector
• Integrated folding support stand
• Adjustable stand angle from 30° to 60°
• Integrated solar angle guide
• IP68-rated water and dust resistance
• Approximately 3.3kg net weight
• Foldable portable construction
• Compact folded dimensions
• Suitable for compatible EcoFlow power stations
• Suitable for supported third-party solar-input devices
• Suitable for camping and outdoor activities
• Suitable for caravan and RV travel
• Suitable for road trips and overlanding
• Suitable for emergency backup charging
• Suitable for temporary off-grid power systems
• Five-year limited manufacturer warranty

Specifications

Compatibility

The EcoFlow 110W Lightweight Portable Bifacial Solar Panel is designed for compatible EcoFlow portable power stations and supported third-party solar charging equipment.

Potentially compatible EcoFlow product families include selected:

• EcoFlow RIVER Series portable power stations
• EcoFlow DELTA Series portable power stations
• EcoFlow power systems with compatible XT60 or XT60i solar inputs

The connected device must support:

• The panel’s 23.5V open-circuit voltage
• The panel’s 19.5V maximum-power voltage
• Current of up to 6.8A under specified bifacial conditions
• Input power of approximately 110W to 122W
• An XT60I-F connection or suitable compatible adapter

A matching connector does not automatically confirm electrical compatibility.

Before connecting the panel, confirm the portable power station or solar charge controller’s:

• Solar-input voltage range
• Maximum open-circuit voltage
• Maximum input current
• Maximum solar-input wattage
• Connector type
• Polarity
• Supported charging protocol

Do not connect the panel if its voltage, current or maximum output exceeds the limits of the connected device.

The integrated XT60I-F cable allows direct connection to compatible devices. A separately sold adapter may be required for devices using a different solar-input connector.

Actual solar charging output depends on:

• Sunlight intensity
• Panel direction and tilt angle
• Reflected light reaching the rear surface
• Cloud cover
• Time of day
• Season
• Ambient temperature
• Panel temperature
• Partial shading
• Dirt or dust on the panel
• Cable and conversion losses
• Connected-device input limits
• Connected battery state of charge

The maximum 122W bifacial rating applies under EcoFlow’s specified BNPI test conditions and is not a guaranteed continuous real-world output.

For improved rear-side generation, position the panel above a light-coloured or reflective surface while ensuring that the rear solar surface remains unobstructed.

Use the integrated solar angle guide to position the panel so that sunlight reaches the front surface as directly as possible.

This panel is intended primarily for temporary portable deployment.

For permanent outdoor, rooftop, vehicle-mounted or extended suspended installation, use a suitable rigid solar-panel system approved for that application.

Do not permanently attach the panel to a moving vehicle or leave it hanging for prolonged periods.

Avoid crushing, piercing, sharply folding or placing heavy objects on the solar cells.

What’s in the Box

• 1 × EcoFlow 110W Lightweight Portable Bifacial Solar Panel
• 1 × Integrated Folding Support Stand
• 1 × Integrated 2.5m XT60I-F Solar Charging Cable
• 1 × Quick Start Guide
• 1 × Safety Instructions

The support stand and solar charging cable are integrated into the panel.

EcoFlow portable power stations, extension cables, adapters and other accessories are sold separately unless specifically included in a bundle.

Warranty

Five-Year EcoFlow Limited Manufacturer Warranty

Sustainability

The EcoFlow 110W Lightweight Portable Bifacial Solar Panel converts sunlight into electrical charging power without consuming fuel during operation.

Its bifacial construction can capture energy from direct sunlight and reflected rear-side light, while N-Type TOPCon solar cells provide up to 25% conversion efficiency.

The foldable design allows the panel to be transported and reused across multiple compatible portable power systems and outdoor applications.

The EcoFlow 160W Lightweight Portable Bifacial Solar Panel combines N-Type TOPCon solar cells, up to 25% conversion efficiency, an integrated XT60 cable and an adjustable folding stand for convenient solar charging while camping, travelling or operating away from mains power.

Product Description

The EcoFlow 160W Lightweight Portable Bifacial Solar Panel is a foldable renewable charging solution designed for compatible EcoFlow portable power stations and supported third-party solar-input devices.

Its bifacial construction combines a front-facing solar surface for capturing direct sunlight with a rear-facing surface that captures reflected ambient light from the surrounding environment.

The panel provides a rated output of 160W ±5W under Standard Test Conditions. Under EcoFlow’s specified BNPI bifacial test conditions, output can reach up to 177W ±5W.

N-Type TOPCon monocrystalline solar cells provide conversion efficiency of up to 25%, helping convert available sunlight into charging power efficiently under suitable outdoor conditions.

An integrated 2.5m solar charging cable with an XT60 connector supports direct connection to compatible EcoFlow portable power stations without requiring a separate standard solar charging cable.

The built-in folding support stand adjusts between 30° and 60°, allowing the panel angle to be changed according to the sun’s position and the surrounding environment.

An integrated solar angle guide assists with positioning the panel so that sunlight reaches the front solar surface at a more effective angle.

The panel weighs approximately 3.8kg, making it around 1.8kg lighter than EcoFlow’s previous-generation 160W Portable Solar Panel.

Its foldable construction and integrated carrying design make it suitable for camping, caravan and RV travel, road trips, remote work and emergency backup charging.

The IP68 water and dust resistance rating supports temporary outdoor use in wet and dusty environments under specified test conditions.

Actual solar output depends on sunlight intensity, panel angle, reflected rear-side light, cloud cover, temperature, shading, panel cleanliness, cable losses and the connected power station’s solar-input limits.

Key Features

• 160W lightweight portable solar panel
• Bifacial solar-panel construction
• Captures direct sunlight through the front surface
• Captures reflected ambient light through the rear surface
• Rated output of 160W ±5W under STC conditions
• Output up to 177W ±5W under BNPI conditions
• N-Type TOPCon monocrystalline solar cells
• Up to 25% solar conversion efficiency
• Integrated 2.5m solar charging cable
• Integrated XT60 connector
• Built-in folding support stand
• Adjustable stand angle from 30° to 60°
• Integrated solar angle guide
• IP68-rated water and dust resistance
• Approximately 3.8kg net weight
• Approximately 1.8kg lighter than the previous-generation model
• Foldable portable construction
• Compact folded dimensions
• Suitable for compatible EcoFlow power stations
• Suitable for supported third-party solar-input devices
• Suitable for camping and outdoor activities
• Suitable for caravan and RV travel
• Suitable for road trips and overlanding
• Suitable for emergency backup charging
• Suitable for temporary off-grid power systems
• Five-year limited manufacturer warranty

Specifications

Compatibility

The EcoFlow 160W Lightweight Portable Bifacial Solar Panel is designed for compatible EcoFlow portable power stations and supported third-party solar charging equipment.

Potentially compatible EcoFlow product families include selected:

• EcoFlow RIVER Series portable power stations
• EcoFlow DELTA Series portable power stations
• EcoFlow products with a compatible XT60 solar input

The connected portable power station or solar charge controller must support:

• An open-circuit voltage of approximately 21.4V
• A maximum-power voltage of approximately 18.8V
• Current of up to 10.2A under specified bifacial conditions
• Solar input from a panel rated between approximately 160W and 177W
• An XT60-compatible solar input

A matching connector does not automatically confirm electrical compatibility.

Before connecting the panel, confirm the portable power station or solar controller’s:

• Solar-input voltage range
• Maximum open-circuit voltage
• Maximum solar-input current
• Maximum solar-input wattage
• Connector type
• Connector polarity
• Supported panel configuration

Do not connect the panel if its voltage, current or maximum output exceeds the supported limits of the connected equipment.

The integrated XT60 cable supports direct connection to compatible EcoFlow portable power stations without requiring a separate standard solar charging cable.

A suitable approved adapter may be required for equipment using a different solar-input connector.

Bifacial Performance

The front solar surface captures direct sunlight, while the rear surface can collect reflected ambient light.

The panel’s standard output rating is 160W ±5W under Standard Test Conditions.

The maximum 177W ±5W output applies under EcoFlow’s specified BNPI bifacial test conditions and is not a guaranteed continuous real-world output.

Rear-side energy generation depends on:

• Ground and surface reflectivity
• Panel height and elevation
• Stand angle
• Strength of direct sunlight
• Rear-side shading
• Cloud cover
• Weather conditions
• Installation environment

Light-coloured or reflective surfaces may provide greater rear-side energy capture than dark or non-reflective surfaces.

Keep the rear solar surface unobstructed to allow reflected light to reach it.

Multiple-Panel Connections

EcoFlow recommends connecting this panel in series only with another panel of the same model and a compatible EcoFlow portable power station.

Parallel connection is not recommended because the combined current may exceed the supported solar-input current of the connected power station.

Before creating a series-connected system, confirm:

• The maximum solar-input voltage of the power station
• The maximum solar-input current
• The maximum solar-input wattage
• The electrical ratings of both panels
• The required series connection accessories
• Connector compatibility
• Cable voltage and current ratings

Series connection increases the combined voltage.

Do not connect multiple panels if the combined open-circuit voltage exceeds the maximum supported input voltage of the connected power station.

Only use matching EcoFlow 160W Lightweight Portable Solar Panels in a series configuration unless EcoFlow confirms another compatible arrangement.

Required series connection accessories are sold separately.

EcoFlow currently states that no compatible extension cable is available for this Lightweight Solar Panel.

Do not use an unverified extension cable or adapter.

Solar Performance

Actual solar output will normally be lower than the maximum laboratory-rated output and varies according to:

• Sunlight intensity
• Panel direction and tilt angle
• Reflected light reaching the rear surface
• Cloud cover
• Weather conditions
• Time of day
• Season
• Ambient temperature
• Panel temperature
• Partial shading
• Dirt or dust on the panel
• Cable and conversion losses
• Connected-device input limits
• Connected battery level

For improved performance, position the panel in direct sunlight and use the integrated solar angle guide to keep sunlight as close as possible to a 90° angle to the front surface.

Avoid shading from trees, buildings, vehicles, aerials, roof racks and other equipment.

Even limited shading across part of the solar surface can significantly reduce the available charging output.

Installation and Use

This panel is designed primarily for temporary portable deployment.

For prolonged hanging, permanent outdoor installation or vehicle-mounted applications, EcoFlow recommends using an appropriate rigid solar-panel system.

Lightweight portable solar panels are not intended for permanent suspended installation or long-term mounting to moving vehicles.

When deploying the panel:

• Place it on a stable surface
• Unfold each section carefully
• Extend the integrated support stand
• Select an angle between 30° and 60°
• Use the solar angle guide to improve positioning
• Keep the front and rear solar surfaces unobstructed
• Route the integrated cable away from walkways
• Connect the XT60 cable securely
• Confirm that the power station detects solar input
• Monitor the panel and cable during charging

Do not:

• Crush or pierce the panel
• Step or sit on the panel
• Place heavy objects on the solar cells
• Fold the panel against its designed hinges
• Sharply bend the solar sections
• Permanently suspend the panel
• Permanently mount it to a moving vehicle
• Use damaged hinges, cables or connectors

IP68 Protection

The IP68 rating provides protection against water and dust under specified laboratory test conditions.

The panel should still be handled as electrical equipment:

• Keep connectors clean and dry before connection
• Do not connect wet or contaminated plugs
• Protect disconnected connectors from dirt and moisture
• Avoid unnecessary prolonged exposure to wet conditions
• Allow the panel and cable to dry before storage
• Do not use damaged cables, connectors or panel surfaces
• Do not store the panel while wet
• Inspect the panel regularly for damage

Extended exposure to moisture may reduce the product’s service life.

What’s in the Box

• 1 × EcoFlow 160W Lightweight Portable Bifacial Solar Panel
• 1 × Quick Start Guide
• 1 × Safety Instructions
• 1 × Warranty Card

The adjustable support stand and approximately 2.5m XT60 charging cable are integrated into the solar panel.

EcoFlow portable power stations, extension cables, series connection accessories and adapters are sold separately unless specifically included in a bundle.

Warranty

Five-Year EcoFlow Limited Manufacturer Warranty

Sustainability

The EcoFlow 160W Lightweight Portable Bifacial Solar Panel converts sunlight into electrical charging power without consuming fuel during operation.

Its bifacial construction can capture energy from direct sunlight and reflected rear-side light, while N-Type TOPCon solar cells provide conversion efficiency of up to 25%.

The lightweight foldable design allows the panel to be transported and reused with multiple compatible portable power systems and outdoor applications.

The EcoFlow 220W Lightweight Portable Bifacial Solar Panel combines N-Type TOPCon solar cells, up to 25% conversion efficiency, an integrated XT60 cable and an adjustable folding stand for portable solar charging while camping, travelling or operating away from mains electricity.

Product Description

The EcoFlow 220W Lightweight Portable Bifacial Solar Panel is a foldable solar charging solution designed for compatible EcoFlow portable power stations and supported third-party solar-input devices.

Its bifacial construction combines a front-facing solar surface for capturing direct sunlight with a rear-facing surface that can capture reflected ambient light from the surrounding environment.

The panel delivers a rated output of 220W under Standard Test Conditions. Under EcoFlow’s specified BNPI bifacial test conditions, output can reach up to 243W.

N-Type TOPCon monocrystalline solar cells provide conversion efficiency of up to 25%, helping convert available sunlight into charging power efficiently under suitable outdoor conditions.

An integrated 2.5m solar charging cable with an XT60 connector allows the panel to connect directly to compatible EcoFlow portable power stations without requiring a separate standard solar charging cable.

The built-in folding support stand adjusts between 30° and 60°, allowing the panel angle to be changed according to the sun’s position and the surrounding environment.

An integrated solar angle guide assists with positioning the panel so that sunlight reaches the front surface at a more effective angle.

The panel weighs approximately 5.1kg, making it around 46% lighter than the previous EcoFlow 220W Bifacial Portable Solar Panel.

Its foldable construction and integrated carrying handle make it suitable for camping, caravan and RV travel, road trips, outdoor work, emergency backup charging and temporary off-grid power systems.

The IP68 water and dust resistance rating supports use in demanding outdoor environments under specified test conditions.

Actual solar output depends on sunlight intensity, panel angle, reflected rear-side light, cloud cover, temperature, shading, panel cleanliness, cable losses and the connected power station’s solar-input limits.

Key Features

• 220W lightweight portable solar panel
• Bifacial solar-panel construction
• Captures direct sunlight through the front surface
• Captures reflected ambient light through the rear surface
• Rated output of 220W ±5W under STC conditions
• Output up to 243W ±5W under BNPI conditions
• N-Type TOPCon monocrystalline solar cells
• Up to 25% solar conversion efficiency
• Integrated 2.5m solar charging cable
• Integrated XT60 connector
• Built-in folding support stand
• Adjustable stand angle from 30° to 60°
• Integrated solar angle guide
• IP68-rated water and dust resistance
• Approximately 5.1kg net weight
• Approximately 46% lighter than the previous 220W bifacial model
• Foldable portable construction
• Compact folded dimensions
• Integrated carrying handle
• Suitable for compatible EcoFlow power stations
• Suitable for supported third-party solar-input devices
• Suitable for camping and outdoor activities
• Suitable for caravan and RV travel
• Suitable for road trips and overlanding
• Suitable for emergency backup charging
• Suitable for temporary off-grid power systems
• Five-year limited manufacturer warranty

Specifications

Compatibility

The EcoFlow 220W Lightweight Portable Bifacial Solar Panel is designed for compatible EcoFlow portable power stations and supported third-party solar charging equipment.

Potentially compatible EcoFlow product families include selected:

• EcoFlow RIVER Series portable power stations
• EcoFlow DELTA Series portable power stations
• EcoFlow products with compatible XT60 or XT60i solar inputs

The connected portable power station or solar charge controller must support:

• An open-circuit voltage of approximately 21.4V
• A maximum-power voltage of approximately 18.8V
• Current of up to 13.5A under specified bifacial conditions
• Solar input from a panel rated between approximately 220W and 243W
• An XT60-compatible solar input or suitable approved adapter

A matching connector does not automatically confirm electrical compatibility.

Before connecting the panel, confirm the portable power station or solar charge controller’s:

• Solar-input voltage range
• Maximum open-circuit voltage
• Maximum solar-input current
• Maximum solar-input wattage
• Connector type
• Connector polarity
• Supported solar-panel configuration

Do not connect the panel if its voltage, current or maximum output exceeds the supported limits of the connected equipment.

The integrated XT60 cable supports direct connection to compatible EcoFlow portable power stations. A suitable adapter may be required for equipment using a different solar-input connector.

Bifacial Performance

The front solar surface captures direct sunlight, while the rear surface can collect reflected ambient light.

The panel’s standard rating is 220W ±5W under Standard Test Conditions.

The maximum 243W ±5W output applies under EcoFlow’s specified BNPI bifacial test conditions and is not a guaranteed continuous real-world output.

Rear-side energy generation depends on:

• Ground and surface reflectivity
• Panel height and elevation
• Panel angle
• Strength of direct sunlight
• Rear-side shading
• Cloud cover
• Weather conditions
• Installation environment

Light-coloured or reflective surfaces may provide greater rear-side energy capture than dark or non-reflective surfaces.

Keep the rear solar surface unobstructed to allow reflected light to reach it.

Multiple-Panel Connections

Before connecting more than one solar panel, confirm that the combined voltage, current and wattage remain within the connected power station’s solar-input limits.

Only combine panels and connection accessories that are electrically compatible.

Series connections increase the combined voltage, while parallel connections increase the combined current.

Before creating a multi-panel setup, confirm:

• Maximum solar-input voltage of the power station
• Maximum solar-input current
• Maximum solar-input wattage
• Electrical ratings of every connected panel
• Required connection cables
• Connector compatibility
• Cable current and voltage ratings
• Accessory availability

Combining panels with different wattages, voltages or current ratings may reduce performance or create an unsafe electrical configuration.

Do not use unverified third-party cables or adapters that do not meet the electrical requirements of the panel and connected power station.

Solar Performance

Actual solar output will normally be lower than the maximum laboratory-rated output and varies according to:

• Sunlight intensity
• Panel direction and tilt angle
• Reflected light reaching the rear surface
• Cloud cover
• Weather conditions
• Time of day
• Season
• Ambient temperature
• Panel temperature
• Partial shading
• Dirt or dust on the panel
• Cable and conversion losses
• Connected-device input limits
• Connected battery level

For improved performance, position the panel in direct sunlight and use the integrated angle guide to keep sunlight as close as possible to a 90° angle to the front surface.

Avoid shading from trees, buildings, vehicles, aerials, roof racks and other equipment.

Even limited shading across part of the solar surface can significantly reduce the available charging output.

Installation and Use

This panel is designed primarily for temporary portable deployment.

For prolonged hanging, permanent outdoor installation or vehicle-mounted applications, EcoFlow recommends using an appropriate rigid solar-panel system.

Lightweight portable solar panels are not intended for permanent suspended installation or long-term mounting to moving vehicles.

When deploying the panel:

• Place it on a stable surface
• Unfold each section carefully
• Extend the integrated support stand
• Select an angle between 30° and 60°
• Use the solar angle guide to improve positioning
• Keep the front and rear solar surfaces unobstructed
• Route the integrated cable away from walkways
• Connect the XT60 cable securely
• Confirm that the power station detects solar input
• Monitor the panel and cable during charging

Do not:

• Crush or pierce the panel
• Step or sit on the panel
• Place heavy objects on the solar cells
• Fold it against its designed hinges
• Sharply bend the solar sections
• Permanently suspend the panel
• Permanently mount it to a moving vehicle
• Use damaged hinges, cables or connectors

IP68 Protection

The IP68 rating provides protection against water and dust under specified laboratory test conditions.

The panel should still be handled as electrical equipment:

• Keep connectors clean and dry before connection
• Do not connect wet or contaminated plugs
• Protect disconnected connectors from dirt and moisture
• Avoid unnecessary prolonged exposure to wet conditions
• Allow the panel and cable to dry before storage
• Do not use damaged cables or connectors
• Do not store the panel while wet
• Inspect the panel regularly for damage

What’s in the Box

• 1 × EcoFlow 220W Lightweight Portable Bifacial Solar Panel
• 1 × Quick Start Guide
• 1 × Safety Instructions

The adjustable support stand and approximately 2.5m XT60 charging cable are integrated into the solar panel.

EcoFlow portable power stations, extension cables, multi-panel connection accessories and adapters are sold separately unless specifically included in a bundle.

Warranty

Five-Year EcoFlow Limited Manufacturer Warranty

Sustainability

The EcoFlow 220W Lightweight Portable Bifacial Solar Panel converts sunlight into electrical charging power without consuming fuel during operation.

Its bifacial design can capture energy from direct sunlight and reflected rear-side light, while N-Type TOPCon solar cells provide conversion efficiency of up to 25%.

The lightweight foldable design allows the panel to be transported and reused with multiple compatible portable power systems and outdoor applications.

The EcoFlow 100W Flexible Solar Panel is a lightweight monocrystalline solar charging panel with up to 23% conversion efficiency, 258° flexibility, pre-cut mounting eyelets and IP68 water and dust resistance for caravans, RVs, vans, boats and compatible off-grid power systems.

Product Description

The EcoFlow 100W Flexible Solar Panel provides renewable solar charging for compatible EcoFlow portable power stations, EcoFlow Power Kits and supported third-party solar systems.

Unlike a conventional rigid solar panel, its lightweight and flexible construction allows it to conform to selected curved and uneven mounting surfaces. This makes it suitable for compatible caravans, RVs, camper vans, boats, cabins and other installations where a heavier rigid panel may not be practical.

The panel delivers a rated output of 100W ±5W under Standard Test Conditions and provides solar conversion efficiency of up to 23%.

Its construction incorporates 182 monocrystalline silicon solar cells manufactured using an advanced glass-fibre and lamination process. A protective ETFE surface layer helps protect the cells during outdoor use.

The panel weighs approximately 2.3kg, making it around 70% lighter than many conventional rigid solar panels.

Flexibility of up to 258° allows the panel to follow suitable curved surfaces when installed within EcoFlow’s specified limits. The panel must not be folded, sharply creased or bent beyond its supported range.

Pre-cut mounting eyelets provide multiple installation options. Depending on the application and mounting surface, the panel may be secured using suitable hooks, fasteners, brackets or approved adhesive.

Integrated bypass diodes help maintain cell performance and reduce overheating when part of the panel is temporarily shaded. Shading can still substantially reduce the panel’s total output.

The IP68 water and dust resistance rating supports use in demanding outdoor environments under specified test conditions.

A separate EcoFlow Solar-to-XT60 or Solar-to-XT60i Charging Cable is required for connection to most compatible EcoFlow portable power stations and is sold separately.

Key Features

• 100W flexible monocrystalline solar panel
• Rated output of 100W ±5W
• Up to 23% solar conversion efficiency
• 182 monocrystalline silicon solar cells
• Advanced glass-fibre construction
• Laminated solar-cell protection
• Protective ETFE surface film
• Integrated bypass diodes
• Helps maintain performance during partial shading
• Approximately 2.3kg net weight
• Approximately 70% lighter than many rigid panels
• Flexible construction for selected curved surfaces
• Flexibility of up to 258°
• Pre-cut mounting eyelets
• Supports multiple installation methods
• IP68 water and dust resistance
• Maximum system voltage of 600V DC
• Maximum fuse rating of 15A
• Suitable for compatible EcoFlow portable power stations
• Suitable for EcoFlow Power Kits
• Suitable for supported third-party solar systems
• Suitable for caravans and RVs
• Suitable for camper vans and overlanding vehicles
• Suitable for compatible boat and marine installations
• Suitable for cabins and off-grid systems
• Suitable for permanent or temporary installation
• Solar-to-XT60 or XT60i cable sold separately
• Professional installation recommended for permanent applications

Specifications

Compatibility

The EcoFlow 100W Flexible Solar Panel may be used with compatible:

• EcoFlow portable power stations
• EcoFlow Power Kits
• Solar charge controllers
• RV and caravan solar systems
• Boat and marine solar systems
• Compatible 12V solar systems
• Compatible 24V solar systems
• Supported 48V solar systems
• Third-party portable power stations
• Off-grid battery systems

Compatibility depends on the voltage, current, wattage, connector type and solar-input limits of the connected equipment.

The connected portable power station or solar controller must support:

• An open-circuit voltage of approximately 20.3V
• A maximum operating voltage of approximately 17.1V
• A short-circuit current of approximately 6.3A
• A maximum operating current of approximately 5.9A
• Input from a solar panel rated at approximately 100W

A matching connector does not automatically confirm electrical compatibility.

Do not connect the solar panel if its voltage, current or wattage exceeds the supported limits of the connected power station, battery system or solar charge controller.

A compatible EcoFlow Solar-to-XT60 or Solar-to-XT60i Charging Cable is required for connection to most EcoFlow portable power stations.

The Solar-to-XT60 or XT60i Charging Cable is sold separately and is not included with the South African product package.

Multiple panels may be connected only when the combined electrical output remains within the limits of the connected equipment.

For multi-panel configurations:

• Series connections increase the combined voltage
• Parallel connections increase the combined current
• Combined wattage may increase
• Properly rated cables, connectors and fuses must be used
• Compatible panels with matching electrical specifications are recommended

Installation

The pre-cut mounting eyelets support installation using suitable:

• Hooks
• Corrosion-resistant fasteners
• Outdoor-rated cable ties
• Compatible mounting brackets
• Industrial adhesive
• Solar-panel mounting accessories

Mounting hardware, adhesive, brackets and installation accessories are not included.

Before installation:

• Confirm that the mounting surface is clean and stable
• Confirm that the surface can support the panel
• Check the required panel curvature
• Avoid sharp edges and pressure points beneath the panel
• Provide adequate ventilation behind the panel
• Keep the junction box and connectors accessible
• Use outdoor-rated mounting materials
• Secure the panel against wind and vibration
• Avoid drilling or cutting through the solar cells
• Do not fold or sharply crease the panel
• Do not exceed the supported flexibility

Professional installation is recommended for permanent vehicle, caravan, RV, marine or building applications.

For vehicle and marine installations:

• Confirm that the mounting surface is suitable
• Consider wind loading and vibration
• Route cables away from moving components
• Keep cables away from exhaust systems and excessive heat
• Protect cables from sharp edges
• Use weather-resistant cable glands
• Confirm compliance with relevant vehicle or marine standards
• Check any vehicle or vessel warranty implications

Solar Performance

The 100W ±5W rating is measured under controlled Standard Test Conditions.

Actual output will normally vary according to:

• Sunlight intensity
• Panel orientation
• Panel angle
• Time of day
• Season
• Cloud cover
• Ambient temperature
• Panel temperature
• Partial shading
• Dirt and dust
• Cable length
• Electrical losses
• Connected-device input limits
• Installation ventilation
• Surface temperature beneath the panel

Under clear conditions with strong sunlight reaching the panel at an effective angle, real-world output may approach the rated figure. Lower output is normal during cloudy weather, high panel temperatures, early morning, late afternoon or partial shading.

Position the panel where it receives direct sunlight with minimal shading.

Integrated bypass diodes may help reduce overheating and maintain partial operation when part of the panel is shaded. They do not eliminate the performance loss caused by shading.

Safety and Care

• Use only compatible connectors, cables and charging equipment
• Do not cut or modify the solar panel
• Do not drill through the solar cells
• Do not stand, sit or place heavy objects on the panel
• Do not fold or sharply crease the panel
• Do not exceed the specified flexibility
• Keep disconnected electrical connectors protected
• Ensure connectors are clean and dry before connection
• Do not use damaged connectors or cables
• Inspect mounting points and electrical connections regularly
• Clean the panel with water and a soft cloth or sponge
• Do not use sharp or abrasive cleaning tools
• Disconnect the panel before maintenance
• Have permanent electrical installations completed by a qualified installer

The IP68 rating applies under controlled test conditions. The complete installation may contain connectors, cable entries and other components with different protection ratings.

What’s in the Box

• 1 × EcoFlow 100W Flexible Solar Panel
• 1 × User Manual
• 1 × Warranty Card

The EcoFlow Solar-to-XT60 or Solar-to-XT60i Charging Cable, mounting hardware, adhesive, brackets and installation accessories are sold separately unless specifically included in a bundle.

Warranty

Three-Year EcoFlow Limited Manufacturer Warranty

Sustainability

The EcoFlow 100W Flexible Solar Panel converts sunlight into electrical charging power without consuming fuel during operation.

Its lightweight flexible design allows renewable solar generation to be added to selected curved vehicle, caravan, marine and off-grid surfaces where a conventional rigid panel may not be suitable.

The panel can also be incorporated into compatible multi-panel systems, subject to the electrical limits of the connected power equipment.

The EcoFlow 800W Alternator Charger converts surplus electrical power generated by a compatible vehicle alternator into fast charging power for selected EcoFlow portable power stations.

Delivering up to 800W charging output, the charger can add approximately 1kWh of stored energy in around 1.3 hours under suitable vehicle and operating conditions.

Product Description

The EcoFlow 800W Alternator Charger provides a fast and efficient way to recharge a compatible EcoFlow portable power station while travelling.

Traditional vehicle accessory sockets typically provide relatively low charging power. The Alternator Charger connects directly to a compatible vehicle starter battery and uses surplus electrical power generated by the alternator while the engine is running.

Its integrated DC-to-DC power converter regulates the available power and can supply up to 800W to a compatible EcoFlow portable power station or extra battery.

Under suitable vehicle and operating conditions, the charger can add approximately 1kWh of stored energy in around 1.3 hours. This is up to eight times faster than conventional vehicle accessory-socket charging.

The charger supports three operating modes when connected to compatible bidirectional EcoFlow equipment: Charging Mode, Reverse Charging Mode and Battery Maintenance Mode.

Charging Mode uses surplus alternator power to recharge the connected EcoFlow portable power station while the vehicle engine is running.

Reverse Charging Mode allows a compatible EcoFlow power station to supply controlled power back to a supported vehicle starter battery or RV house battery at up to 800W.

Battery Maintenance Mode provides lower-power charging of up to 100W to help maintain the voltage of a compatible starter or house battery.

The reverse-charging function may assist with restoring energy to a low vehicle battery. The Alternator Charger should not be treated as a conventional direct-cranking jump starter.

The charger supports compatible 12V and 24V vehicle electrical systems and is suitable for selected SUVs, 4×4 vehicles, pickup trucks, vans, caravans, motorhomes and RVs.

Wi-Fi and Bluetooth connectivity allow charging power, operating modes, status information and selected settings to be monitored through the EcoFlow App.

Professional installation by a competent vehicle electrician or installer is recommended because the charger connects directly to the vehicle starter battery and carries high electrical current.

Key Features

• Up to 800W alternator charging output
• Adds approximately 1kWh in around 1.3 hours
• Up to eight times faster than vehicle accessory-socket charging
• Integrated DC-to-DC power conversion
• Supports compatible 12V vehicle systems
• Supports compatible 24V vehicle systems
• Three operating modes with compatible bidirectional equipment
• Charging Mode
• Reverse Charging Mode
• Battery Maintenance Mode
• Maximum reverse-charging output of 800W
• Maximum battery-maintenance output of 100W
• Compatible with selected EcoFlow DELTA Series products
• Includes a 1m XT150 output cable
• Includes a 5m vehicle input cable
• Includes a fused high-current battery connection
• 125A fuse rating
• Wi-Fi connectivity
• Bluetooth connectivity
• EcoFlow App monitoring and control
• Charging-power adjustment through the EcoFlow App
• Gallium Nitride power technology
• Reverse-polarity protection
• Overcurrent protection
• Short-circuit protection
• Overvoltage protection
• Undervoltage protection
• Vehicle starter-battery protection
• Temperature monitoring
• Suitable for SUVs, 4×4 vehicles, pickups, vans, caravans and RVs
• Suitable for overlanding and off-grid travel
• Suitable for mobile work and remote job sites
• Professional installation recommended

Specifications

Compatibility

The included 1m XT150 output cable is designed for compatible EcoFlow portable power stations and Extra Batteries featuring a supported XT150 extra-battery port.

Direct XT150-compatible products may include:

• EcoFlow DELTA 2
• EcoFlow DELTA 2 Smart Extra Battery
• EcoFlow DELTA 2 Max
• EcoFlow DELTA 2 Max Smart Extra Battery
• EcoFlow DELTA Max 2000

EcoFlow DELTA Pro

The included XT150 output cable does not connect directly to the EcoFlow DELTA Pro.

Connecting the Alternator Charger to DELTA Pro requires the separately sold:

• EcoFlow DELTA Pro to Smart Generator Adapter

Confirm that the required adapter is included when purchasing a product bundle.

EcoFlow DELTA 3 Max

The included XT150 output cable does not connect directly to the EcoFlow DELTA 3 Max.

Connecting the Alternator Charger to DELTA 3 Max requires the separately sold:

• EcoFlow Alternator Charger XT60 Output Cable

The XT60 Output Cable may be included when the DELTA 3 Max and Alternator Charger are purchased together as an official bundle.

When connected to DELTA 3 Max through the XT60 Output Cable:

• The Alternator Charger can charge the DELTA 3 Max
• Reverse charging to the vehicle battery is not supported
• The connection should be treated as a power-station charging configuration
• Do not rely on Reverse Charging or Battery Maintenance Mode with this connection

Other EcoFlow Products

Products without a compatible XT150 port may require a separately sold model-specific output cable or adapter.

Before ordering, confirm:

• The EcoFlow power-station model
• The charging-port type
• Whether alternator charging is supported
• The required output cable or adapter
• The maximum charging input accepted by the power station
• Whether Reverse Charging Mode is supported
• Whether Battery Maintenance Mode is supported

The charger is designed for suitable vehicles equipped with a compatible 12V or 24V starter battery and alternator system.

Potential vehicle applications include:

• SUVs
• 4×4 vehicles
• Pickup trucks
• Vans
• Caravans
• Motorhomes
• RVs
• Overlanding vehicles
• Mobile work vehicles
• Vehicles with compatible auxiliary batteries
• Vehicles with compatible house-battery systems

Petrol and diesel vehicles fitted with conventional alternators are generally the most suitable.

Some vehicles with smart alternators, advanced battery-management systems, hybrid systems or specialised electrical systems may provide reduced charging performance or require additional configuration.

Pure electric vehicles do not use a conventional engine-driven alternator and should not be assumed compatible.

Actual charging output depends on:

• Vehicle alternator capacity
• Available surplus alternator power
• Engine speed
• Vehicle electrical load
• Starter-battery voltage
• Smart-alternator behaviour
• Charger power settings
• Cable installation
• Ambient temperature
• Connected EcoFlow product
• Portable power-station battery level
• Portable power-station input limits

The maximum 800W output is not guaranteed in every vehicle or under every operating condition.

Professional installation by a competent vehicle electrician or installer is recommended.

Before installation, confirm any vehicle-warranty implications with the vehicle manufacturer, dealership or warranty provider.

The charger must be installed away from:

• Excessive engine heat
• Exhaust components
• Fuel lines
• Moving mechanical parts
• Sharp edges
• Areas where water may collect
• Airbags
• Vehicle safety systems
• Areas where luggage may damage the cables
• Poorly ventilated or enclosed spaces

Incorrect installation may result in cable overheating, electrical short circuits, blown fuses, product damage, vehicle damage, fire or personal injury.

What’s in the Box

• 1 × EcoFlow 800W Alternator Charger
• 1 × Installation Board
• 1 × Cable Puller
• 1 × 5m Vehicle Input Cable
• 1 × 1m XT150 Output Cable
• 1 × Fuse Cable
• Mounting Screws, Nuts and Installation Hardware
• 1 × User Manual
• 1 × Warranty Card

The EcoFlow DELTA Pro to Smart Generator Adapter, Alternator Charger XT60 Output Cable and other model-specific cables or adapters are not included unless specifically stated as part of a bundle.

Warranty

Two-Year EcoFlow Limited Manufacturer Warranty

Sustainability

The EcoFlow 800W Alternator Charger uses surplus electrical power generated by a compatible vehicle alternator to recharge selected portable power stations while driving.

Its DC-to-DC charging system can reduce the need to return to a mains power connection between trips, while Battery Maintenance Mode can help maintain a compatible vehicle starter battery or RV house battery when used with supported bidirectional equipment.

The EcoFlow Solar Parallel Connection Cable connects compatible solar panels in parallel for selected EcoFlow RIVER and DELTA Series portable power stations, helping increase the available solar charging current while maintaining a similar panel voltage.

Product Description

The EcoFlow Solar Parallel Connection Cable is designed to connect multiple compatible solar panels in parallel before connecting them to a supported EcoFlow portable power station.

A parallel solar connection combines the available current from compatible connected panels while maintaining a voltage similar to that of a single panel.

This can increase the available solar charging power when the combined panel voltage, current and wattage remain within the supported solar-input limits of the connected EcoFlow power station.

EcoFlow lists the cable for connecting up to two compatible solar panels when charging selected RIVER Series portable power stations.

For selected DELTA Series portable power stations, the cable can be used to connect up to four compatible solar panels, subject to the input limitations of the specific DELTA model.

The actual number and type of solar panels that can be connected depend on the panels’ electrical specifications and the maximum voltage, current and wattage accepted by the portable power station.

The cable uses compatible solar connectors commonly found on EcoFlow portable solar panels. It may also be suitable for selected third-party solar panels with matching connectors and compatible electrical specifications.

A separate EcoFlow Solar-to-XT60 or Solar-to-XT60i Charging Cable may be required to connect the combined solar-panel output to the portable power station.

Solar panels, portable power stations and additional charging cables are sold separately.

Key Features

• Connects compatible solar panels in parallel
• Designed for selected EcoFlow RIVER Series power stations
• Designed for selected EcoFlow DELTA Series power stations
• Helps increase the available solar charging current
• Maintains a voltage similar to that of one connected panel
• Supports up to two compatible panels for selected RIVER setups
• Supports up to four compatible panels for selected DELTA setups
• Compatible with selected EcoFlow portable solar panels
• Uses compatible MC4-style solar connectors
• May support compatible third-party solar panels
• Compact and portable cable design
• Simple plug-and-connect installation
• Suitable for camping and outdoor use
• Suitable for caravan and RV solar systems
• Suitable for overlanding and off-grid setups
• Suitable for remote work and backup charging
• Portable power station sold separately
• Solar panels sold separately
• Solar-to-XT60 or XT60i cable may be required

Specifications

Compatibility

Designed for selected:

• EcoFlow RIVER Series portable power stations
• EcoFlow DELTA Series portable power stations
• EcoFlow portable solar panels with compatible connectors
• Third-party solar panels with matching connectors and suitable electrical specifications

EcoFlow lists support for:

• Up to two compatible solar panels for selected RIVER Series systems
• Up to four compatible solar panels for selected DELTA Series systems

These quantities are general configuration guidelines and do not mean that every RIVER or DELTA model can accept the full combined output of any two or four panels.

Before connecting multiple solar panels, confirm:

• Open-circuit voltage of each panel
• Operating voltage of each panel
• Short-circuit current of each panel
• Operating current of each panel
• Combined parallel current
• Combined panel wattage
• Power station solar-input voltage range
• Maximum power station solar-input current
• Maximum power station solar-input wattage
• Panel connector type
• Required Solar-to-XT60 or XT60i charging cable

A matching connector does not automatically confirm electrical compatibility.

Do not connect a panel configuration that exceeds the voltage, current or wattage limits of the connected EcoFlow portable power station.

For stable and predictable charging performance, use matching solar panels with the same:

• Rated wattage
• Operating voltage
• Open-circuit voltage
• Operating current
• Connector type
• Solar-cell technology

Connecting panels with different electrical ratings may reduce charging performance or cause the combined output to be limited by the lower-performing panel.

The Solar Parallel Connection Cable joins the solar panels together. A compatible Solar-to-XT60 or Solar-to-XT60i Charging Cable may also be required to connect the parallel cable to the portable power station.

Actual solar charging output depends on:

• Sunlight intensity
• Panel angle and orientation
• Cloud cover
• Ambient temperature
• Panel temperature
• Partial shading
• Dirt or dust on the panels
• Cable length and electrical losses
• Solar-panel condition
• Portable power station battery level
• Portable power station input limits

Keep all connectors clean and dry. Do not connect damaged, wet or contaminated plugs.

Disconnect the solar input before changing the panel configuration.

Do not cut, modify, crush or sharply bend the cable.

What’s in the Box

• 1 × EcoFlow Solar Parallel Connection Cable

Solar panels, EcoFlow portable power stations, Solar-to-XT60 or XT60i charging cables, extension cables and other accessories are sold separately.

Warranty

One-Year EcoFlow Limited Manufacturer Warranty

Sustainability

The EcoFlow Solar Parallel Connection Cable allows compatible solar panels to be combined into a larger portable solar charging setup without replacing the existing panels.

Parallel connection can help increase the solar charging current available to a compatible EcoFlow power station when the complete configuration remains within the supported electrical limits.

The EcoFlow WAVE 3 is a portable air conditioner and heater with 6100 BTU cooling, 6800 BTU heating, smart app control and flexible AC or battery-powered operation for caravans, camping, compact rooms and mobile workspaces.

Product Description

The EcoFlow WAVE 3 Portable Air Conditioner provides portable cooling and heating for caravans, camper vans, tents, cabins, compact rooms, mobile workspaces and temporary off-grid environments.

It delivers 6100 BTU of cooling capacity and 6800 BTU of heating capacity, allowing the unit to provide year-round climate control without requiring permanent installation.

Under EcoFlow’s specified test conditions, the WAVE 3 can reduce the temperature by up to 8°C in approximately 15 minutes or increase the temperature by up to 9°C in approximately 15 minutes.

The adjustable temperature range of 16°C to 30°C allows the unit to provide cooling or heating according to the selected operating mode and environmental conditions.

Five operating functions are available, including Cooling, Heating, Fan, Automatic and Dehumidification.

Automatic Function adjusts operation according to the selected temperature and surrounding conditions, while Sleep Mode reduces noise to approximately 44dB under suitable operating conditions.

The EcoFlow App provides remote control through Wi-Fi or Bluetooth. Supported functions include temperature adjustment, operating-mode selection, fan-speed control, scheduled shutdown, battery monitoring and water-drain notifications.

The Pet Care function allows a temperature threshold to be configured through the EcoFlow App. When the selected threshold is exceeded, the WAVE 3 can begin cooling and send an app notification.

The included insulated exhaust duct and three adapter covers support different installation arrangements in tents, vehicles, caravans, cabins and compact rooms.

The WAVE 3 can operate directly from a compatible AC wall outlet. Cordless operation requires a separately sold EcoFlow WAVE 3 Add-On Battery, compatible WAVE 2 Add-On Battery or supported EcoFlow portable power station.

The WAVE 3 does not contain an internal battery. Add-On Batteries, portable power stations, solar panels and other power accessories are sold separately unless specifically included in a bundle.

Key Features

• 6100 BTU cooling capacity
• 6800 BTU heating capacity
• 1800W cooling capacity
• 2000W heating capacity
• Temperature setting range from 16°C to 30°C
• Reduces temperature by up to 8°C in approximately 15 minutes
• Increases temperature by up to 9°C in approximately 15 minutes
• Cooling function
• Heating function
• Fan function
• Automatic temperature-management function
• Dehumidification function
• Sleep Mode with noise from approximately 44dB
• Pet Care temperature-monitoring function
• Water-level and drainage alerts
• Maximum airflow of approximately 330m³ per hour
• EcoFlow App monitoring and control
• Wi-Fi connectivity
• Bluetooth connectivity
• Supports 2.4GHz and 5GHz Wi-Fi
• Compatible with the EcoFlow WAVE 3 Add-On Battery
• Compatible with the EcoFlow WAVE 2 Add-On Battery
• Supports approximately 2 to 8 hours of cordless operation with a compatible Add-On Battery
• Supports selected EcoFlow portable power stations
• Supports compatible XT150 power connections
• Includes an insulated exhaust duct
• Includes three exhaust duct adapter covers
• Includes a drain pipe
• IPX4 water-resistance rating
• Compact portable construction
• Approximately 15.6kg net weight
• Suitable for caravans and camper vans
• Suitable for camping and overlanding
• Suitable for cabins and compact rooms
• Suitable for mobile and temporary workspaces
• Does not contain an internal battery

Specifications

Compatibility

The EcoFlow WAVE 3 can be powered using:

• A compatible AC wall outlet
• EcoFlow WAVE 3 Add-On Battery
• EcoFlow WAVE 2 Add-On Battery
• Selected EcoFlow portable power stations
• A supported XT150 connection
• Compatible model-specific cables or adapters

The WAVE 3 does not contain an internal battery.

Cordless or off-grid operation requires a separately sold compatible Add-On Battery, portable power station or supported external power source.

When connected to the EcoFlow WAVE 3 Add-On Battery, the system may provide approximately two to eight hours of portable cooling or heating.

Actual runtime depends on:

• Selected cooling or heating mode
• Target temperature
• Fan speed
• Eco Mode settings
• Outdoor temperature
• Size of the conditioned space
• Insulation
• Direct sunlight
• Door and window openings
• Exhaust-duct installation
• Battery condition
• Operating demand

The EcoFlow WAVE 2 Add-On Battery is compatible with the WAVE 3 without requiring a firmware update.

Compatibility with EcoFlow portable power stations depends on:

• Available output power
• Connection-port type
• XT150 port availability
• Required cable or adapter
• Portable power station capacity
• Battery charge level
• Current firmware

Correct exhaust-duct installation is required for effective cooling and heating.

In Cooling Mode, warm exhaust air must be directed outside the area being cooled.

In Heating Mode, cold exhaust air must be directed outside the area being heated.

Poor duct installation, air leakage or recirculation of exhaust air can significantly reduce performance.

EcoFlow’s rapid cooling and heating results were measured in a controlled space of approximately 10m³. Actual performance varies according to room size, insulation, outdoor temperature, humidity, sunlight and airflow.

Pet Care is an additional monitoring function and does not replace responsible supervision, reliable ventilation, suitable backup power or proper animal-care precautions.

The WAVE 3 carries an IPX4 splash-resistance rating. It is not waterproof and must not be submerged, left in heavy rain, operated in standing water or cleaned with high-pressure water.

The unit uses flammable R290 refrigerant. Refrigerant servicing must only be completed by an appropriately qualified technician.

Before moving or storing the WAVE 3:

• Switch the unit off
• Disconnect all power sources
• Drain accumulated water
• Disconnect the exhaust duct
• Keep the unit upright
• Avoid tilting or overturning the unit
• Store it in a dry, ventilated location

What’s in the Box

• 1 × EcoFlow WAVE 3 Portable Air Conditioner
• 1 × Insulated Exhaust Duct
• 1 × Exhaust Duct Adapter Cover A
• 1 × Exhaust Duct Adapter Cover B
• 1 × Exhaust Duct Adapter Cover C
• 1 × Drain Pipe
• 1 × Cable Winder
• 1 × Duct Size Template
• 1 × Quick Start Guide
• 1 × Safety Instructions
• 1 × Warranty Card

The EcoFlow WAVE 3 Add-On Battery, WAVE 2 Add-On Battery, portable power station, solar panels, Alternator Charger and other accessories are sold separately unless specifically included in a bundle.

Warranty

Two-Year EcoFlow Limited Manufacturer Warranty

Sustainability

The EcoFlow WAVE 3 combines portable cooling, heating, fan circulation and dehumidification functions in one reusable appliance.

Its compatibility with EcoFlow Add-On Batteries and selected portable power stations allows it to operate away from mains electricity. Compatible battery systems may also be recharged using supported solar or vehicle-charging equipment.

The portable design allows the unit to be moved between different compact spaces without requiring a separate permanently installed air-conditioning system in each location.

The EcoFlow WAVE 3 Add-On Battery is a detachable 1024Wh LFP battery designed to provide cordless cooling and heating power for the compatible EcoFlow WAVE 3 Portable Air Conditioner.

The EcoFlow WAVE 3 Portable Air Conditioner is sold separately.

Product Description

The EcoFlow WAVE 3 Add-On Battery is designed to provide portable battery power for the compatible EcoFlow WAVE 3 Portable Air Conditioner.

Connecting the Add-On Battery allows the WAVE 3 to operate away from a wall outlet, making the system suitable for camping, caravan and RV travel, overlanding, cabins, mobile workspaces and temporary off-grid climate control.

Its 1024Wh lithium iron phosphate battery can support approximately two to eight hours of WAVE 3 cooling or heating, depending on the selected operating mode, target temperature, fan speed, environmental conditions and cooling or heating demand.

The long-life LFP battery is rated for approximately 4,000 complete charging cycles before reaching around 80% of its original capacity.

Its detachable design allows the battery to be removed from the WAVE 3 for transport, charging, storage or maintenance.

The Add-On Battery supports multiple charging methods, including charging through the connected WAVE 3, direct solar charging, compatible vehicle charging and selected EcoFlow Alternator Charger configurations.

The integrated solar input supports up to 400W from compatible solar panels. Under suitable conditions, the battery can recharge in approximately three hours using the maximum supported solar input.

When AC power is supplied through the connected WAVE 3, the battery can recharge in approximately two hours. Combined AC and solar charging may reduce the charging time to approximately 75 minutes under suitable conditions.

The battery also includes USB-A and high-power USB-C outputs, allowing it to charge compatible phones, tablets, laptops and other USB-powered equipment.

This product is an Add-On Battery only. It does not provide cooling or heating independently and does not include the EcoFlow WAVE 3 Portable Air Conditioner.

Key Features

• 1024Wh Add-On Battery
• Designed for the EcoFlow WAVE 3 Portable Air Conditioner
• Provides cordless WAVE 3 cooling and heating
• Supports approximately two to eight hours of WAVE 3 runtime
• Long-life lithium iron phosphate battery chemistry
• Approximately 4,000 charging cycles to 80% capacity
• Detachable design
• Suitable for transport and separate storage
• Maximum input power of 1000W
• Maximum battery output of 858W
• Maximum solar charging input of 400W
• Supports compatible 12V and 24V vehicle charging
• Maximum vehicle charging input of 200W
• USB-A output up to 18W
• USB-C Power Delivery output up to 140W
• Supports charging through the connected WAVE 3
• Supports compatible solar-panel charging
• Supports compatible vehicle charging
• Supports selected EcoFlow Alternator Charger configurations
• Includes an Add-On Battery connection cable
• Includes a vehicle-charging cable
• Approximately 9.7kg net weight
• Compact low-profile construction
• Suitable for camping and outdoor activities
• Suitable for caravan and RV travel
• Suitable for overlanding and 4×4 trips
• Suitable for cabins and mobile workspaces
• Battery only
• Does not provide cooling or heating independently
• EcoFlow WAVE 3 sold separately

Specifications

Compatibility

Designed for use with:

• EcoFlow WAVE 3 Portable Air Conditioner

The Add-On Battery supplies portable electrical power to the WAVE 3 but does not produce cooling or heating independently.

The EcoFlow WAVE 3 Portable Air Conditioner must be purchased separately unless specifically included as part of a bundle.

When connected to the WAVE 3, the Add-On Battery may provide approximately two to eight hours of cooling or heating.

Actual runtime depends on:

• Selected cooling or heating mode
• Target temperature
• Fan speed
• Eco Mode settings
• Outdoor temperature
• Room or enclosure size
• Insulation
• Direct sunlight and heat exposure
• Door and window openings
• Exhaust-duct installation
• Battery condition
• WAVE 3 operating demand

The maximum advertised runtime is generally achieved under lower-demand operating conditions. Continuous maximum cooling or heating will reduce runtime.

Solar charging requires a compatible solar panel and suitable EcoFlow Solar-to-XT60 or XT60i charging cable.

Vehicle charging requires a compatible 12V or 24V vehicle accessory socket and the supplied vehicle-charging cable.

Vehicle charging should normally be performed while the engine is running to reduce the risk of discharging the starter battery.

Alternator charging requires a compatible EcoFlow Alternator Charger and the correct model-specific connection cable.

Compatibility with portable power stations depends on the EcoFlow model, available connection port, required cable, supported charging direction and firmware.

The USB-C port can charge compatible laptops, tablets, smartphones and other USB-C Power Delivery devices up to its supported output limit.

The Add-On Battery should not be submerged or exposed to heavy rain, standing water or high-pressure water.

Use only compatible EcoFlow cables and charging accessories.

What’s in the Box

• 1 × EcoFlow WAVE 3 Add-On Battery
• 1 × Add-On Battery Cable
• 1 × Vehicle-Charging Cable
• 1 × Quick Start Guide
• 1 × Safety Instructions
• 1 × Warranty Card

The EcoFlow WAVE 3 Portable Air Conditioner, solar panels, solar charging cables, Alternator Charger and portable power stations are sold separately unless specifically included in a bundle.

Warranty

EcoFlow South Africa Warranty Period to Be Confirmed

Sustainability

The EcoFlow WAVE 3 Add-On Battery uses long-life lithium iron phosphate battery chemistry and is rated for approximately 4,000 complete charging cycles before reaching around 80% of its original capacity.

Its detachable design allows the battery to be transported, stored or replaced separately from the WAVE 3 Portable Air Conditioner.

Solar charging compatibility also provides an alternative way to recharge the battery using suitable portable solar panels.

The EcoFlow RIVER 3 UPS is a compact 245Wh portable power station with 300W AC output, 600W surge power, X-Boost support, under-10ms UPS switchover and quiet operation for home, office, travel and outdoor backup power.

Product Description

The EcoFlow RIVER 3 UPS is a compact and quiet portable power station designed for home backup, office use, travel, camping and everyday mobile power.

Its 245Wh lithium iron phosphate battery provides stored energy for compatible routers, laptops, mobile devices, lights, cameras and selected low-wattage appliances during short power interruptions or when mains electricity is unavailable.

The RIVER 3 UPS provides a continuous pure sine wave AC output of 300W, with surge power of up to 600W. EcoFlow X-Boost technology can support selected compatible appliances rated up to approximately 600W by adjusting the supplied voltage.

The UPS model includes an automatic transfer time of under 10 milliseconds. When connected and used correctly, it can help keep compatible routers, communication equipment, computers and selected low-power electronics operating during a brief mains interruption.

The RIVER 3 UPS can power or charge up to five compatible devices simultaneously through its AC, USB-A, USB-C and vehicle power outputs.

Its 100W USB-C port supports compatible laptops, tablets, smartphones and other USB-C devices. Two USB-A ports and a 12.6V vehicle power outlet provide additional charging options.

EcoFlow X-Stream charging technology can recharge the battery from approximately 0% to 100% in 60 minutes through a compatible AC mains connection.

The power station also supports compatible solar charging at up to 110W, vehicle charging at up to 100W and generator charging through its AC input.

Its long-life LiFePO₄ battery is rated for approximately 3000 complete charging cycles before reaching around 80% of its original capacity.

EcoFlow X-GaNPower technology improves energy efficiency and thermal performance, helping the RIVER 3 UPS provide extended runtime for low-wattage devices while operating at less than 30dB under specified conditions.

The internal battery pack has an IP54 protection rating against limited dust and water exposure. This rating applies to the battery pack and does not make the complete power station waterproof.

Key Features

• 245Wh portable power station
• 300W continuous pure sine wave AC output
• 600W surge output
• X-Boost support up to 600W for selected compatible appliances
• Under-10ms UPS switchover
• Powers up to five compatible devices simultaneously
• Long-life lithium iron phosphate battery chemistry
• Approximately 3000 charging cycles to 80% capacity
• Recharges from approximately 0% to 100% in 60 minutes
• Maximum AC charging input of 305W
• Maximum solar charging input of 110W
• Solar charging in as fast as approximately 2.6 hours
• Maximum vehicle charging input of 100W
• Vehicle charging in approximately 2.8 hours
• Generator charging support through the AC input
• One South African-standard AC outlet
• Two USB-A charging ports
• One USB-C port with up to 100W output
• One 12.6V vehicle power outlet
• Supports up to five connected devices
• Quiet operation below 30dB
• X-GaNPower energy-efficiency technology
• X-Guard battery protection technology
• Integrated battery management system
• IP54-rated internal battery-pack protection
• Compact and lightweight construction
• Approximately 3.55kg net weight
• Suitable for home, office, travel and outdoor use
• Suitable for routers, laptops, phones, lights and cameras

Specifications

Compatibility

The EcoFlow RIVER 3 UPS may be suitable for powering or charging compatible low-wattage devices within its supported output limits, including:

• Wi-Fi routers and fibre equipment
• Laptops
• Mobile phones
• Tablets
• Cameras and camera batteries
• LED lights
• Small desktop equipment
• Selected computer monitors
• Selected televisions within the output limit
• Portable speakers
• Small fans
• Selected CPAP devices, subject to device requirements
• Camping equipment
• Outdoor electronics
• Other compatible AC, USB or 12V devices

The combined continuous AC power requirement of connected equipment must remain within the RIVER 3 UPS’s 300W rated AC output.

Devices containing motors, pumps, compressors, heating elements or transformers may require substantially more power during startup. Check both the normal operating and startup requirements before connecting a device.

X-Boost can support selected compatible appliances rated up to approximately 600W by adjusting the supplied voltage. It does not increase the RIVER 3 UPS’s normal continuous output above 300W.

X-Boost may not be suitable for:

• Voltage-sensitive electronics
• Precision instruments
• Appliances with compressors
• Devices containing motors
• Equipment with strict voltage requirements
• Critical medical equipment
• Devices requiring stable full-voltage operation

The under-10ms UPS function applies specifically to the EcoFlow RIVER 3 UPS model.

Before using the unit as a UPS, confirm that the connected equipment:

• Can tolerate a transfer time of up to 10 milliseconds
• Does not exceed the RIVER 3 UPS output limits
• Supports use with a transfer-type UPS or portable power station
• Does not require a zero-transfer online UPS
• Is connected according to EcoFlow’s operating instructions

Critical medical, life-support, server, security, industrial or telecommunications equipment may require a dedicated online UPS or specialised backup-power system.

Solar charging requires a compatible solar panel and a suitable EcoFlow Solar-to-XT60 or XT60i charging cable. Solar panels and charging cables are sold separately unless specifically included in a bundle.

Vehicle charging requires a compatible vehicle-charging cable and a suitable 12V or 24V vehicle accessory socket.

The IP54 rating applies only to the internal battery pack. The complete portable power station is not waterproof and must not be submerged or intentionally exposed to heavy rain, standing water or high-pressure water.

Runtime varies according to connected-device wattage, the number of connected devices, battery level, conversion losses, temperature and operating conditions.

What’s in the Box

• 1 × EcoFlow RIVER 3 UPS Portable Power Station
• 1 × AC Charging Cable
• 1 × Quick Start Guide

Solar panels, solar charging cables, vehicle-charging cables and additional accessories are sold separately unless specifically included in a bundle.

Warranty

Two-Year EcoFlow Limited Manufacturer Warranty

Sustainability

The EcoFlow RIVER 3 UPS uses long-life lithium iron phosphate battery chemistry and is rated for approximately 3000 complete charging cycles before reaching around 80% of its original capacity.

Its X-GaNPower design improves energy efficiency for low-wattage equipment, while solar charging compatibility provides an alternative way to recharge the unit using compatible solar panels.