EcoFlow 110W Lightweight Portable Bifacial Solar Panel

At a Glance

• 110W ±5W rated solar output
• Up to 122W ±5W output under bifacial BNPI test conditions
• Bifacial design captures light from both sides
• N-Type TOPCon monocrystalline solar cells
• Up to 25% conversion efficiency
• Lightweight at approximately 3.3kg ±0.3kg
• Integrated 2.5m solar charging cable
• XT60I-F connector
• Built-in folding support stand
• Adjustable 30°–60° stand angle
• Integrated solar angle guide
• IP68 water and dust resistance
• Compact foldable design
• 5-year EcoFlow warranty

Short Description

The EcoFlow 110W Lightweight Portable Bifacial Solar Panel is a compact, foldable solar charging solution with up to 25% conversion efficiency, an integrated XT60 cable and adjustable support stand for compatible portable power stations.

Why Choose This EcoFlow

The EcoFlow 110W Lightweight Portable Solar Panel combines efficient solar generation with a lightweight, easy-to-carry design for portable charging at home or away from mains power.

Its bifacial construction allows the front surface to capture direct sunlight while the rear surface can also collect reflected ambient light.

N-Type TOPCon monocrystalline solar cells provide up to 25% conversion efficiency, helping make effective use of available sunlight.

At approximately 3.3kg, the panel is designed for easy transport, while the integrated 2.5m XT60 charging cable reduces the number of separate accessories needed for compatible EcoFlow power stations.

The built-in support stand adjusts between 30° and 60°, and the integrated solar angle guide helps you position the panel more effectively towards the sun.

Best For

• Portable power station solar charging
• Home backup systems
• Load-shedding charging support
• Camping
• Road trips
• Overlanding
• Caravans and outdoor travel
• Day trips
• Emergency backup charging
• Temporary off-grid setups
• Outdoor work
• Users wanting a lightweight portable solar panel

Product Description

The EcoFlow 110W Lightweight Portable Bifacial Solar Panel is designed to provide convenient renewable charging for compatible portable power stations.

It delivers a rated output of 110W ±5W under Standard Test Conditions.

Its bifacial design allows the front surface to capture direct sunlight while the rear side captures additional reflected ambient light. Under specified BNPI bifacial test conditions, output can reach up to 122W ±5W.

The panel uses N-Type TOPCon monocrystalline silicon solar cells with conversion efficiency of up to 25%.

An integrated 2.5m charging cable with an XT60I-F connector allows direct connection to compatible solar-input equipment without carrying a separate standard solar charging cable.

The folding support stand can be adjusted between 30° and 60°, allowing the panel angle to be changed according to the position of the sun. An integrated solar angle guide also assists with positioning.

At approximately 3.3kg ±0.3kg, the panel is designed to be easy to transport and store.

When unfolded, it measures approximately 1944 × 413 × 26mm and folds down to approximately 544 × 413 × 36mm for storage.

An IP68 water and dust resistance rating provides added protection for portable outdoor use within the limits of the rating.

Key Features

• 110W Rated Power: Delivers 110W ±5W under Standard Test Conditions.
• Bifacial Solar Design: Captures direct sunlight from the front and reflected ambient light from the rear surface.
• Up to 122W Bifacial Output: Can reach up to 122W ±5W under specified BNPI test conditions.
• N-Type TOPCon Cells: Uses N-Type TOPCon monocrystalline silicon solar technology.
• Up to 25% Efficiency: Converts available sunlight into charging energy with up to 25% conversion efficiency.
• Lightweight Design: Weighs approximately 3.3kg ±0.3kg for easier transport.
• Built-In Charging Cable: Integrated 2.5m solar charging cable simplifies setup.
• XT60I-F Connector: Designed for connection to compatible EcoFlow and supported solar-input equipment.
• Adjustable Stand: Integrated folding support stand adjusts between 30° and 60°.
• Solar Angle Guide: Helps position the panel more effectively towards available sunlight.
• Foldable Design: Folds down into a more compact size for transport and storage.
• IP68 Rated: Provides water and dust resistance for portable outdoor use.
• 5-Year Warranty: Covered by EcoFlow's 5-year limited warranty.

Specifications

Solar Performance

Standard Rated Output

110W ±5W

This is the panel's rated output under Standard Test Conditions.

Bifacial Output

Up to 122W ±5W

The rear solar surface can capture reflected ambient light in addition to the direct sunlight collected by the front surface.

The higher bifacial output applies under specified BNPI test conditions and should not be treated as guaranteed continuous real-world output.

Conversion Efficiency

Up to 25%

N-Type TOPCon monocrystalline solar cells provide high conversion efficiency while maintaining a lightweight portable design.

Electrical Specifications

Built-In 2.5m Charging Cable

The solar charging cable is integrated into the panel for easier setup, storage and transport.

Cable Length: Approximately 2.5m

Connector: XT60I-F

This allows direct connection to compatible portable power stations without requiring a separate standard solar charging cable.

Adjustable Support Stand

The integrated folding stand can be adjusted between:

30° and 60°

Adjusting the panel angle helps position the solar surface more directly towards the sun.

The built-in solar angle guide can also be used to help optimise positioning.

Compatibility

The EcoFlow 110W Lightweight Portable Bifacial Solar Panel is designed for compatible portable power stations and solar-input equipment.

Before connecting the panel, ensure that the power station or solar charging device supports the panel's electrical specifications.

Panel Output Specifications

• Open-Circuit Voltage: 23.5V
• Maximum Power Voltage: 19.5V
• Maximum Current: Up to 6.8A under specified bifacial conditions
• Rated Power: 110W ±5W
• Bifacial Output: Up to 122W ±5W under specified BNPI conditions
• Connector: XT60I-F

The connected device must support the panel's voltage, current and power output.

A matching connector alone does not guarantee electrical compatibility.

Always check the solar-input voltage range, maximum input current and maximum solar-input power of the connected power station before use.

Solar Charging Performance

Actual solar charging performance will vary depending on:

• Sunlight intensity
• Time of day
• Season
• Cloud cover
• Panel angle
• Panel direction
• Reflected light reaching the rear surface
• Temperature
• Partial shading
• Dirt or dust on the panel
• Cable and conversion losses
• Connected power station input limits
• Battery state of charge

For best performance, position the panel in direct sunlight with the solar surface unobstructed and adjust the stand as the position of the sun changes.

Outdoor Use

The panel carries an IP68 water and dust resistance rating.

This provides protection for portable outdoor charging in suitable conditions.

For best performance:

• Keep the solar surfaces clean
• Avoid unnecessary shading
• Position the panel towards direct sunlight
• Use the adjustable support stand to optimise the angle
• Keep the rear solar surface unobstructed where possible to benefit from the bifacial design

The lightweight portable panel is intended for temporary portable deployment rather than permanent or extended hanging installations.

For long-term fixed or hanging installations, use a solar panel designed for permanent mounting.

What’s in the Box

• 1 × EcoFlow 110W Lightweight Portable Bifacial Solar Panel with integrated folding support stand
• Integrated 2.5m XT60 solar charging cable

Warranty

5-Year EcoFlow Limited Warranty

Sustainability

The EcoFlow 110W Lightweight Portable Bifacial Solar Panel converts sunlight into electrical charging energy without consuming fuel during operation.

Its bifacial design can capture energy from both direct sunlight and reflected ambient light, while N-Type TOPCon solar-cell technology provides up to 25% conversion efficiency.