The Synology HAT3320-8T is an 8TB Plus Series 3.5-inch SATA hard drive designed for reliable 24/7 storage in compatible Synology systems, featuring CMR technology, a helium-sealed design, 7,200 RPM speed, 512MB cache and sustained transfer speeds of up to 281MB/s.

Product Description

The Synology HAT3320-8T 8TB Plus Series Hard Drive is designed for reliable storage, backup, file sharing and multi-user data workloads in compatible Synology systems.

Built for continuous 24/7 operation, the drive uses Conventional Magnetic Recording technology to provide consistent write performance in supported RAID arrays and storage pools.

Its helium-sealed design helps support efficient operation, reduced internal resistance and dependable performance in compatible Synology storage environments.

The HAT3320-8T features a SATA 6Gb/s interface, 7,200 RPM rotational speed, 512MB cache and a typical maximum sustained data-transfer speed of up to 281MB/s.

With a 300TB per year workload rating and a 1,200,000-hour MTBF rating, the drive is suited to demanding home, small-office and business storage workloads.

Synology Plus Series drives undergo more than 500,000 cumulative hours of compatibility and stress testing. Compatible firmware updates can also be installed directly through Synology DiskStation Manager without removing the drive or using third-party firmware tools.

This product is an internal 3.5-inch SATA hard drive. A Synology NAS enclosure is not included.

Key Features

• Official Synology Plus Series hard drive
• 8TB storage capacity
• Designed for compatible Synology systems
• Suitable for continuous 24/7 operation
• 3.5-inch hard-drive form factor
• SATA 6Gb/s interface
• Conventional Magnetic Recording technology
• Helium-sealed drive design
• 512e sector format
• 7,200 RPM rotational speed
• 512MB cache
• Up to 281MB/s typical sustained transfer speed
• 300TB per year workload rating
• 1,200,000-hour MTBF rating
• More than 500,000 cumulative hours of Synology testing
• Firmware updates through Synology DSM
• Suitable for compatible RAID configurations
• Three-year limited hardware warranty

Recommended Uses

• Compatible Synology NAS systems
• Home and small-office storage
• Centralised file storage
• Computer and server backup
• Shared business data
• Personal cloud storage
• Media and document libraries
• Multi-user file access
• Compatible RAID configurations
• Storage-pool expansion
• Continuous NAS storage workloads
• Archive and surveillance storage

Specifications

Compatibility Note

Please confirm that the Synology HAT3320-8T is officially compatible with your exact Synology NAS or storage system before ordering.

Compatibility may vary according to the Synology system model, hardware revision, supported drive list and installed DSM version.

The HAT3320-8T is an internal 3.5-inch SATA hard drive and requires a compatible SATA drive bay.

It is not an external USB hard drive, portable storage device, solid-state drive or complete NAS system.

The available capacity displayed by Synology DSM will be lower than the stated 8TB capacity because of storage calculations, formatting, system partitions, RAID configuration and other system requirements.

Actual transfer performance depends on the Synology system, RAID configuration, network connection, workload, other installed drives and active DSM applications.

MTBF is a statistical reliability measurement and is not a guarantee or estimate of the operating life of an individual hard drive.

RAID helps protect against selected drive failures but does not replace an independent backup.

Installation Guidance

Before installation:

• Confirm compatibility with the Synology system
• Back up important existing data
• Use suitable anti-static precautions
• Handle the drive by its sides
• Secure the drive correctly in the drive tray
• Follow the Synology hardware-installation guide

After installation:

• Confirm the drive is detected in DSM
• Check the drive-health status
• Apply supported firmware updates
• Configure or expand the storage pool
• Allow initialisation or repair operations to complete
• Maintain an independent backup

Do not remove the drive during RAID repair, storage-pool expansion, data scrubbing, firmware updates or other critical storage operations.

What’s in the Box

• 1 × Synology HAT3320-8T 8TB Plus Series 3.5-Inch SATA Hard Drive

A Synology NAS enclosure is not included.

Warranty

Three-Year Synology Limited Hardware Warranty

Sustainability

The Synology HAT3320-8T is RoHS compliant.

Compatible firmware updates can be managed through Synology DSM without removing the drive or connecting it to separate firmware equipment.

The drive should be recycled through an appropriate electronic-waste recycling facility at the end of its usable life.

The Synology HAT3310-16T is a 16TB Plus Series 3.5-inch SATA hard drive designed for reliable 24/7 storage in compatible Synology systems, featuring CMR technology, a helium-sealed design, 7,200 RPM speed, 512MB cache and sustained transfer speeds of up to 281MB/s.

Product Description

The Synology HAT3310-16T 16TB Plus Series Hard Drive is designed for dependable storage, backup, file sharing and multi-user data workloads in compatible Synology systems.

Built for continuous 24/7 operation, the drive uses Conventional Magnetic Recording technology to provide consistent write performance in supported RAID arrays and storage pools.

Its helium-sealed design supports efficient and reliable operation in high-uptime storage environments.

The HAT3310-16T features a SATA 6Gb/s interface, 7,200 RPM rotational speed, 512MB cache and a typical maximum sustained data-transfer speed of up to 281MB/s.

With a 180TB per year workload rating and a 1,200,000-hour MTBF rating, the drive is suitable for demanding home, small-office and business storage workloads.

Synology Plus Series drives undergo more than 500,000 cumulative hours of compatibility and stress testing. Compatible firmware updates can also be installed directly through Synology DiskStation Manager without removing the drive or using third-party firmware tools.

This product is an internal 3.5-inch SATA hard drive. A Synology NAS enclosure is not included.

Key Features

• Official Synology Plus Series hard drive
• 16TB storage capacity
• Designed for compatible Synology systems
• Suitable for continuous 24/7 operation
• 3.5-inch hard-drive form factor
• SATA 6Gb/s interface
• Conventional Magnetic Recording technology
• Helium-sealed drive design
• 512e sector format
• 7,200 RPM rotational speed
• 512MB cache
• Up to 281MB/s typical sustained transfer speed
• 180TB per year workload rating
• 1,200,000-hour MTBF rating
• More than 500,000 cumulative hours of Synology testing
• Firmware updates through Synology DSM
• Suitable for compatible RAID configurations
• Three-year limited hardware warranty

Recommended Uses

• Compatible Synology NAS systems
• Home and small-office storage
• Centralised file storage
• Computer and server backup
• Shared business data
• Personal cloud storage
• Media and document libraries
• Multi-user file access
• Compatible RAID configurations
• Storage-pool expansion
• Continuous NAS storage workloads
• Archive and surveillance storage

Specifications

Compatibility Note

Please confirm that the Synology HAT3310-16T is officially compatible with your exact Synology NAS or storage system before ordering.

Compatibility may vary according to the Synology system model, hardware revision, supported drive list and installed DSM version.

The HAT3310-16T is an internal 3.5-inch SATA hard drive and requires a compatible SATA drive bay.

It is not an external USB hard drive, portable storage device, solid-state drive or complete NAS system.

The available capacity displayed by Synology DSM will be lower than the stated 16TB capacity because of storage calculations, formatting, system partitions, RAID configuration and other system requirements.

Actual transfer performance depends on the Synology system, RAID configuration, network connection, workload, other installed drives and active DSM applications.

MTBF is a statistical reliability measurement and is not a guarantee or estimate of the operating life of an individual hard drive.

RAID helps protect against selected drive failures but does not replace an independent backup.

Installation Guidance

Before installation:

• Confirm compatibility with the Synology system
• Back up important existing data
• Use suitable anti-static precautions
• Handle the drive by its sides
• Avoid touching the SATA connector or circuit board
• Secure the drive correctly in the drive tray
• Follow the Synology hardware-installation guide

After installation:

• Confirm the drive is detected in DSM
• Check the drive-health status
• Apply supported firmware updates
• Configure or expand the storage pool
• Allow initialisation or repair operations to complete
• Maintain an independent backup

Do not remove the drive during RAID repair, storage-pool expansion, data scrubbing, firmware updates or other critical storage operations.

What’s in the Box

• 1 × Synology HAT3310-16T 16TB Plus Series 3.5-Inch SATA Hard Drive

A Synology NAS enclosure is not included.

Warranty

Three-Year Synology Limited Hardware Warranty

Sustainability

The Synology HAT3310-16T is RoHS compliant.

Compatible firmware updates can be managed through Synology DSM without removing the drive or connecting it to separate firmware equipment.

The drive should be recycled through an appropriate electronic-waste recycling facility at the end of its usable life.

The Synology HAT3310-12T is a 12TB Plus Series 3.5-inch SATA hard drive designed for reliable 24/7 storage in compatible Synology systems, featuring CMR technology, a helium-sealed design, 7,200 RPM speed, 512MB cache and sustained transfer speeds of up to 281MB/s.

Product Description

The Synology HAT3310-12T 12TB Plus Series Hard Drive is designed for dependable storage, backup, file sharing and multi-user data workloads in compatible Synology systems.

Built for continuous 24/7 operation, the drive uses Conventional Magnetic Recording technology to provide consistent write performance in supported RAID arrays and storage pools.

Its helium-sealed design supports reliable and efficient operation in high-uptime storage environments.

The HAT3310-12T features a SATA 6Gb/s interface, 7,200 RPM rotational speed, 512MB cache and a typical maximum sustained data-transfer speed of up to 281MB/s.

With a 180TB per year workload rating and a 1,200,000-hour MTBF rating, the drive is suited to home, small-office and business storage workloads.

Synology Plus Series drives undergo more than 500,000 cumulative hours of compatibility and stress testing. Compatible firmware updates can also be installed directly through Synology DiskStation Manager without removing the drive or using third-party firmware tools.

This product is an internal 3.5-inch SATA hard drive. A Synology NAS enclosure is not included.

Key Features

• Official Synology Plus Series hard drive
• 12TB storage capacity
• Designed for compatible Synology systems
• Suitable for continuous 24/7 operation
• 3.5-inch hard-drive form factor
• SATA 6Gb/s interface
• Conventional Magnetic Recording technology
• Helium-sealed drive design
• 512e sector format
• 7,200 RPM rotational speed
• 512MB cache
• Up to 281MB/s typical sustained transfer speed
• 180TB per year workload rating
• 1,200,000-hour MTBF rating
• More than 500,000 cumulative hours of Synology testing
• Firmware updates through Synology DSM
• Suitable for compatible RAID configurations
• Three-year limited hardware warranty

Recommended Uses

• Compatible Synology NAS systems
• Home and small-office storage
• Centralised file storage
• Computer and server backup
• Shared business data
• Personal cloud storage
• Media and document libraries
• Multi-user file access
• Compatible RAID configurations
• Storage-pool expansion
• Continuous NAS storage workloads
• Archive and surveillance storage

Specifications

Compatibility Note

Please confirm that the Synology HAT3310-12T is officially compatible with your exact Synology NAS or storage system before ordering.

Compatibility may vary according to the Synology system model, hardware revision, supported drive list and installed DSM version.

The HAT3310-12T is an internal 3.5-inch SATA hard drive and requires a compatible SATA drive bay.

It is not an external USB hard drive, portable storage device, solid-state drive or complete NAS system.

The available capacity displayed by Synology DSM will be lower than the stated 12TB capacity because of storage calculations, formatting, system partitions, RAID configuration and other system requirements.

Actual transfer performance depends on the Synology system, RAID configuration, network connection, workload, other installed drives and active DSM applications.

MTBF is a statistical reliability measurement and is not a guarantee or estimate of the operating life of an individual hard drive.

RAID helps protect against selected drive failures but does not replace an independent backup.

Installation Guidance

Before installation:

• Confirm compatibility with the Synology system
• Back up important existing data
• Use suitable anti-static precautions
• Handle the drive by its sides
• Secure the drive correctly in the drive tray
• Follow the Synology hardware-installation guide

After installation:

• Confirm the drive is detected in DSM
• Check the drive-health status
• Apply supported firmware updates
• Configure or expand the storage pool
• Allow initialisation or repair operations to complete
• Maintain an independent backup

Do not remove the drive during RAID repair, storage-pool expansion, data scrubbing, firmware updates or other critical storage operations.

What’s in the Box

• 1 × Synology HAT3310-12T 12TB Plus Series 3.5-Inch SATA Hard Drive

A Synology NAS enclosure is not included.

Warranty

Three-Year Synology Limited Hardware Warranty

Sustainability

The Synology HAT3310-12T is RoHS compliant.

Compatible firmware updates can be managed through Synology DSM without removing the drive or connecting it to separate firmware equipment.

The drive should be recycled through an appropriate electronic-waste recycling facility at the end of its usable life.

The Synology HAT3300-6T is a 6TB Plus Series 3.5-inch SATA hard drive designed for reliable 24/7 storage in compatible Synology systems, featuring CMR technology, a 5,400 RPM rotational speed, 256MB cache and typical sustained transfer speeds of up to 202MB/s.

Product Description

The Synology HAT3300-6T 6TB Plus Series Hard Drive is designed for dependable storage, backup, file sharing and everyday data management in compatible Synology systems.

Built for continuous operation in home, small-office and multi-user storage environments, the drive uses Conventional Magnetic Recording technology to provide consistent write performance throughout its operating life.

The HAT3300-6T features a SATA 6Gb/s interface, 5,400 RPM rotational speed, 256MB cache and a typical maximum sustained data-transfer speed of up to 202MB/s.

With a 180TB per year workload rating and a 1,000,000-hour MTBF rating, the drive is designed for ongoing NAS storage workloads. Synology Plus Series drives undergo more than 500,000 cumulative hours of compatibility and stress testing for reliable operation in supported Synology systems.

Compatible firmware updates can be performed directly through Synology DiskStation Manager, helping simplify drive maintenance without requiring removal of the drive or third-party firmware tools.

This product is an internal 3.5-inch SATA hard drive. A Synology NAS enclosure is not included.

Key Features

• Official Synology Plus Series hard drive
• 6TB storage capacity
• Designed for compatible Synology systems
• Suitable for continuous 24/7 storage operation
• 3.5-inch form factor
• SATA 6Gb/s interface
• 512e sector format
• Air-sealed drive design
• Conventional Magnetic Recording technology
• 5,400 RPM rotational speed
• 256MB cache
• Up to 202MB/s typical sustained transfer speed
• 180TB per year workload rating
• 1,000,000-hour MTBF rating
• More than 500,000 cumulative hours of Synology testing
• Firmware updates through Synology DSM
• Suitable for compatible RAID configurations
• Three-year limited hardware warranty

Recommended Uses

• Compatible Synology NAS systems
• Home and small-office storage
• Centralised file storage
• Computer and server backup
• Shared business data
• Personal cloud storage
• Media and document libraries
• Multi-user file access
• Compatible RAID configurations
• Storage-pool expansion
• Continuous NAS storage workloads
• General data archiving

Specifications

Compatibility Note

Please confirm that the Synology HAT3300-6T is officially compatible with your exact Synology NAS or storage system before ordering.

Compatibility may vary according to the Synology system model, hardware revision, supported drive list and installed DSM version.

The HAT3300-6T is an internal 3.5-inch SATA hard drive and requires a compatible SATA drive bay.

It is not an external USB hard drive, portable storage device, solid-state drive or complete NAS system.

The available capacity displayed by Synology DSM will be lower than the stated 6TB capacity because of storage calculations, formatting, system partitions, RAID configuration and other system requirements.

Actual transfer performance depends on:

• Synology system model
• RAID configuration
• Network connection
• File size and workload
• Other installed drives
• Active DSM applications

MTBF is a statistical reliability measurement and is not a guarantee or estimate of the operating life of an individual hard drive.

RAID helps protect against selected drive failures but does not replace an independent backup.

Installation Guidance

Before installation:

• Confirm compatibility with the Synology system
• Back up important existing data
• Use suitable anti-static precautions
• Handle the drive by its sides
• Secure the drive correctly in the drive tray
• Follow the Synology hardware-installation guide

After installation:

• Confirm the drive is detected in DSM
• Check the drive-health status
• Apply supported firmware updates
• Configure or expand the storage pool
• Allow initialisation or repair operations to complete
• Maintain an independent backup

Do not remove the drive during RAID repair, storage-pool expansion, data scrubbing, firmware updates or other critical storage operations.

What’s in the Box

• 1 × Synology HAT3300-6T 6TB Plus Series 3.5-Inch SATA Hard Drive

A Synology NAS enclosure is not included.

Warranty

Three-Year Synology Limited Hardware Warranty

Sustainability

The Synology HAT3300-6T is RoHS compliant.

Compatible firmware updates can be managed through Synology DSM without removing the drive or connecting it to separate firmware equipment.

The drive should be recycled through an appropriate electronic-waste recycling facility at the end of its usable life.

The Synology HAT3300-4T is a 4TB Plus Series 3.5-inch SATA hard drive designed for reliable 24/7 storage in compatible Synology systems, featuring CMR technology, a 5,400 RPM rotational speed, 256MB cache and typical sustained transfer speeds of up to 202MB/s.

Product Description

The Synology HAT3300-4T 4TB Plus Series Hard Drive is designed for dependable storage, backup, file sharing and everyday data management in compatible Synology NAS systems.

Built for continuous operation in home, small-office and multi-user storage environments, the drive uses Conventional Magnetic Recording technology to provide consistent write performance throughout its operating life.

The HAT3300-4T features a SATA 6Gb/s interface, 5,400 RPM rotational speed, 256MB cache and a typical maximum sustained data-transfer speed of up to 202MB/s.

With a 180TB per year workload rating and a 1,000,000-hour MTBF rating, the drive is designed for ongoing NAS storage workloads. Synology Plus Series drives undergo more than 500,000 cumulative hours of compatibility and stress testing for reliable operation in supported Synology systems.

Compatible firmware updates can be performed directly through Synology DiskStation Manager, helping simplify drive maintenance without requiring removal of the drive or third-party firmware tools.

This product is an internal 3.5-inch SATA hard drive. A Synology NAS enclosure is not included.

Key Features

• Official Synology Plus Series hard drive
• 4TB storage capacity
• Designed for compatible Synology systems
• Suitable for continuous 24/7 storage operation
• 3.5-inch form factor
• SATA 6Gb/s interface
• Conventional Magnetic Recording technology
• 5,400 RPM rotational speed
• 256MB cache
• Up to 202MB/s typical sustained transfer speed
• 180TB per year workload rating
• 1,000,000-hour MTBF rating
• More than 500,000 cumulative hours of Synology testing
• Firmware updates through Synology DSM
• Suitable for compatible RAID configurations
• Three-year limited hardware warranty

Recommended Uses

• Compatible Synology NAS systems
• Home and small-office storage
• Centralised file storage
• Computer and server backup
• Shared business data
• Personal cloud storage
• Media and document libraries
• Multi-user file access
• RAID storage configurations
• Storage-pool expansion
• Continuous NAS storage workloads

Specifications

Compatibility Note

Please confirm that the Synology HAT3300-4T is officially compatible with your exact Synology NAS or storage system before ordering.

Compatibility may vary according to the Synology system model, hardware revision, supported drive list and installed DSM version.

The HAT3300-4T is an internal 3.5-inch SATA hard drive and requires a compatible SATA drive bay.

It is not an external USB hard drive, portable storage device, solid-state drive or complete NAS system.

The available capacity displayed by Synology DSM will be lower than the stated 4TB capacity because of storage calculations, formatting, system partitions, RAID configuration and other system requirements.

Actual transfer performance depends on:

• Synology system model
• RAID configuration
• Network connection
• File size and workload
• Other installed drives
• Active DSM applications

MTBF is a statistical reliability measurement and is not a guarantee or estimate of the operating life of an individual hard drive.

RAID helps protect against selected drive failures but does not replace an independent backup.

Installation Guidance

Before installation:

• Confirm compatibility with the Synology system
• Back up important existing data
• Use suitable anti-static precautions
• Handle the drive by its sides
• Secure the drive correctly in the drive tray
• Follow the Synology hardware-installation guide

After installation:

• Confirm the drive is detected in DSM
• Check the drive-health status
• Apply supported firmware updates
• Configure or expand the storage pool
• Allow initialisation or repair operations to complete
• Maintain an independent backup

Do not remove the drive during RAID repair, storage-pool expansion, data scrubbing, firmware updates or other critical storage operations.

What’s in the Box

• 1 × Synology HAT3300-4T 4TB Plus Series 3.5-Inch SATA Hard Drive

A Synology NAS enclosure is not included.

Warranty

Three-Year Synology Limited Hardware Warranty

Sustainability

The Synology HAT3300-4T is RoHS compliant.

Compatible firmware updates can be managed through Synology DSM without removing the drive or connecting it to separate firmware equipment.

The drive should be recycled through an appropriate electronic-waste recycling facility at the end of its usable life.

The Synology D4ES03-8G is an official 8GB DDR4 ECC unbuffered SODIMM memory module designed to increase available system memory in compatible Synology DiskStation and RackStation systems.

Product Description

The Synology D4ES03-8G is an 8GB DDR4 ECC unbuffered SODIMM memory module designed for selected Synology systems.

Increasing system memory can help a compatible Synology NAS support additional users, larger workloads and more simultaneously active Synology DiskStation Manager applications.

Error-Correcting Code memory helps detect and correct selected memory errors during operation, supporting system stability and data integrity in compatible storage environments.

The D4ES03-8G uses a compact SODIMM form factor. It is not interchangeable with full-size UDIMM, RDIMM, non-ECC or other Synology memory-module types.

Memory compatibility and supported configurations depend on the exact Synology system. Installed modules must follow the memory requirements stated in the applicable Synology product manual.

Key Features

• Official Synology memory module
• 8GB memory capacity
• DDR4 memory technology
• Error-Correcting Code memory
• Unbuffered SODIMM form factor
• Designed for compatible Synology systems
• Supports selected DiskStation models
• Supports selected RackStation models
• Suitable for memory-intensive DSM workloads
• Five-year limited hardware warranty

Recommended Use Cases

• Expanding memory in compatible Synology systems
• Supporting additional simultaneous users
• Running multiple DSM applications
• Synology Drive and Office workloads
• Backup and synchronisation applications
• Virtual Machine Manager workloads
• Database and indexing workloads
• Multi-user file services

Specifications

Compatible Synology Models

26 Series

• RS1226RP+
• RS1226+
• RS826RP+
• RS826+

25 Series

• DS1825+
• DS1525+
• DS925+
• DS725+

23 Series

• DS1823xs+
• DS923+
• DS723+

22 Series

• RS822RP+
• RS822+
• DS3622xs+
• DS2422+
• DS1522+

Compatibility Note

Please confirm that the D4ES03-8G is officially compatible with your exact Synology system before ordering.

Compatibility depends on:

• Exact Synology model
• Hardware revision
• Existing memory configuration
• Available memory slots
• Maximum supported memory
• Required module combination

Do not select this module solely because the system uses DDR4, ECC or SODIMM memory.

The D4ES03-8G is not a replacement for UDIMM, RDIMM, non-ECC memory or another Synology memory-module family.

For multi-module configurations, follow the memory-population requirements in the product manual for the applicable Synology system.

What’s in the Box

• 1 × Synology D4ES03-8G 8GB DDR4 ECC Unbuffered SODIMM Memory Module

A Synology system and additional memory modules are not included.

Warranty

Five-Year Synology Limited Hardware Warranty

Sustainability

The D4ES03-8G can increase the available memory and useful operating life of a compatible Synology system without replacing the complete storage appliance.

The Synology D4ES03-16G is a 16GB DDR4 ECC unbuffered SODIMM memory module designed to expand the system memory of compatible Synology NAS systems.

Product Description

The Synology D4ES03-16G provides 16GB of additional DDR4 ECC memory for selected Synology DiskStation and RackStation systems.

Expanding system memory can provide additional resources for supported applications, virtualisation, backup tasks and multi-user workloads.

Compatibility depends on the exact Synology model and installed memory configuration.

Key Features

• Official Synology memory module
• 16GB memory capacity
• DDR4 memory technology
• ECC error-correcting memory
• Unbuffered SODIMM form factor
• Designed for compatible Synology systems
• Supports memory expansion for demanding workloads
• Five-year Synology hardware warranty

Recommended Use Cases

• Expanding compatible Synology NAS memory
• Multi-user file environments
• Business backup workloads
• Virtualisation applications
• Synology Drive and collaboration services
• Surveillance workloads
• Running multiple DSM applications
• Improving available system resources

Specifications

Compatibility Note

Confirm that the intended Synology NAS and memory configuration are compatible with the D4ES03-16G before ordering.

Compatible models currently include selected:

• RS826RP+ and RS826+
• DS1825+, DS1525+, DS925+ and DS725+
• DS1823xs+, DS923+ and DS723+
• RS822RP+, RS822+, DS3622xs+, DS2422+ and DS1522+
• RS1221RP+, RS1221+, DS1821+, DS1621xs+, DS1621+ and DVA3221

When installing two memory modules, check the host system’s requirements regarding matching capacities and model numbers.

A DDR4 SODIMM with the same capacity or physical form factor is not automatically compatible. Use only memory listed as supported for the intended Synology system.

What’s in the Box

• Synology D4ES03-16G 16GB memory module

Warranty

Five-year Synology hardware warranty.

Sustainability

Upgrading the memory of a compatible Synology system can provide additional resources for changing workloads without replacing the complete NAS.

The Synology BeeDrive BDS70-2T is a compact 2TB USB 3.2 Gen 2 portable SSD with transfer speeds of up to 1,050MB/s, automatic computer backup, file synchronisation, mobile backup and AI-powered file search.

Product Description

The Synology BeeDrive BDS70-2T is a compact 2TB portable solid state drive designed for fast file storage, automatic backup and easy file management.

Its USB 3.2 Gen 2 interface supports transfer speeds of up to 1,050MB/s when connected to a compatible computer, cable and USB port.

BeeDrive for desktop can automatically back up selected folders and synchronise files between BeeDrive and supported Windows or macOS computers.

The BeeDrive mobile application supports photo and video backup, remote file access and wireless BeeDrop file transfers from supported iOS and Android devices.

AI-powered Deep Search allows supported documents and images stored on BeeDrive to be searched according to their content rather than relying only on filenames and folders. Deep Search requires a compatible computer that meets Synology’s current hardware and operating-system requirements.

BeeDrive can also back up supported iCloud Photos libraries, SD cards and files stored on compatible external drives through a connected computer.

The BDS70-2T can be used as a conventional portable SSD without installing the BeeDrive software.

Its compact design and 43g weight make it suitable for carrying documents, photographs, videos, creative projects and business files.

Key Features

• 2TB portable solid state drive
• USB 3.2 Gen 2 interface
• Interface bandwidth of up to 10Gbps
• Transfer speeds of up to 1,050MB/s
• USB-C connection
• Automatic computer-folder backup
• File synchronisation support
• Mobile photo and video backup
• iCloud Photos backup support
• SD card and external-drive backup support
• BeeDrop wireless file transfer
• Remote mobile file access
• Supports backup from up to five mobile devices
• AI-powered Deep Search
• Can operate as a standard portable SSD
• Compatible with supported Windows and macOS computers
• Compatible with supported iOS and Android devices
• Compact 65 × 65 × 15mm design
• Lightweight 43g construction
• Includes USB-C cable and USB-A adapter
• Three-year limited hardware warranty

Recommended Use Cases

• Portable file storage
• Computer backup
• File synchronisation
• Mobile photo and video backup
• iCloud Photos backup
• SD card backup
• Document storage
• Business-file transport
• Creative-project storage
• Photography and video workflows
• AI-assisted file searches
• Home and office file management
• Travel storage

Specifications

Compatibility Note

For computer backup and file synchronisation, Synology currently supports:

• Windows 10 64-bit version 1809 or later
• Windows 11 or later
• macOS 12 or later

Windows 10 on ARM and Windows Server editions are not supported.

For mobile backup and BeeDrop functions:

• iOS 15 or later
• Android 10 or later

Deep Search requires a compatible Windows computer with supported NVIDIA graphics or an Apple silicon Mac that meets Synology’s current system requirements.

Mobile backup, remote access and BeeDrop require BeeDrive to remain connected to a powered-on computer running the BeeDrive desktop application.

Maximum transfer speed requires a compatible USB 3.2 Gen 2 port and suitable cable.

The available formatted capacity will be lower than the stated 2TB because of storage calculations, formatting and system requirements.

What’s in the Box

• 1 × Synology BeeDrive BDS70-2T 2TB Portable SSD
• 1 × USB-C to USB-C Cable
• 1 × USB-C to USB-A Adapter
• 1 × Quick Start Guide

Warranty

Three-Year Synology Limited Hardware Warranty

Sustainability

The Synology BeeDrive BDS70-2T is RoHS compliant and should be recycled through an appropriate electronic-waste recycling facility at the end of its usable life.

The Synology BeeDrive BDS70-1T is a compact 1TB USB 3.2 Gen 2 portable SSD with transfer speeds of up to 1,050MB/s, automatic computer backup, file synchronisation, mobile backup and AI-powered file search.

Product Description

The Synology BeeDrive BDS70-1T is a compact 1TB portable solid state drive designed for fast file storage, automatic backup and easy file management.

Its USB 3.2 Gen 2 interface supports transfer speeds of up to 1,050MB/s when connected to a compatible computer and USB port.

BeeDrive for desktop can automatically back up selected folders and synchronise files between BeeDrive and supported Windows or macOS computers.

The BeeDrive mobile application supports photo and video backup, remote file access and wireless BeeDrop file transfers from supported iOS and Android devices.

AI-powered Deep Search allows supported documents and images stored on BeeDrive to be searched according to their content rather than relying only on filenames and folders. Deep Search requires a compatible computer that meets Synology’s published hardware and operating-system requirements.

BeeDrive can also be used as a conventional portable SSD without using the BeeDrive software.

Its compact design and 43g weight make it suitable for carrying documents, photographs, videos, creative projects and business files.

Key Features

• 1TB portable solid state drive
• USB 3.2 Gen 2 interface
• Transfer speeds of up to 1,050MB/s
• USB-C connection
• Automatic computer-folder backup
• File synchronisation support
• Mobile photo and video backup
• BeeDrop wireless file transfer
• Remote mobile file access
• AI-powered Deep Search
• Can operate as a standard portable SSD
• Compatible with supported Windows and macOS computers
• Compatible with supported iOS and Android devices
• Compact 65 × 65 × 15mm design
• Lightweight 43g construction
• Includes USB-C cable and USB-A adapter
• Three-year limited hardware warranty

Recommended Use Cases

• Portable file storage
• Computer backup
• File synchronisation
• Mobile photo and video backup
• Document storage
• Business-file transport
• Creative-project storage
• Photography and video workflows
• AI-assisted file searches
• Home and office file management
• Travel storage

Specifications

Compatibility Note

For computer backup and file synchronisation, Synology currently supports:

• Windows 10 64-bit version 1809 or later
• Windows 11 or later
• macOS 12 or later

For mobile backup and BeeDrop functions:

• iOS 15 or later
• Android 10 or later

Deep Search requires a compatible Windows computer with supported NVIDIA graphics or a compatible Apple silicon Mac that meets Synology’s current system requirements.

Mobile backup and remote access require BeeDrive to remain connected to a powered-on computer running the BeeDrive desktop application.

Maximum transfer speed requires a compatible USB 3.2 Gen 2 port and suitable cable.

The available formatted capacity will be lower than the stated 1TB because of storage calculations, formatting and system requirements.

What’s in the Box

• 1 × Synology BeeDrive BDS70-1T 1TB Portable SSD
• 1 × USB-C to USB-C Cable
• 1 × USB-C to USB-A Adapter
• 1 × Quick Start Guide

Warranty

Three-Year Synology Limited Hardware Warranty

Sustainability

The Synology BeeDrive BDS70-1T is RoHS compliant and should be recycled through an appropriate electronic-waste recycling facility at the end of its usable life.

The Synology HAT5320-8T is an 8TB Enterprise Series 3.5-inch SATA hard drive designed for reliable 24/7 storage in compatible Synology systems, featuring CMR technology, a helium-sealed design, 7,200 RPM speed, 512MB buffer and typical sustained transfer speeds of up to 281MB/s.

Product Description

The Synology HAT5320-8T 8TB Enterprise Series Hard Drive is designed for demanding storage, backup and business data workloads in compatible Synology systems.

Built for continuous operation in enterprise and multi-user storage environments, the drive uses Conventional Magnetic Recording technology to provide consistent write performance in supported RAID arrays and storage pools.

The helium-sealed HAT5320-8T features a SATA 6Gb/s interface, 7,200 RPM rotational speed, 512MB buffer and a typical maximum sustained data-transfer speed of up to 281MB/s.

With a 550TB per year workload rating and a 2,000,000-hour MTBF rating, the drive is designed for high-volume enterprise storage workloads. Synology Enterprise Series drives undergo more than 500,000 cumulative hours of compatibility and stress testing.

Persistent Write Cache technology helps reduce the risk of data corruption during unexpected power loss. Compatible firmware updates can also be installed directly through Synology DiskStation Manager, simplifying drive maintenance.

This product is an internal 3.5-inch SATA hard drive. A Synology NAS or storage system is not included.

Key Features

• Official Synology Enterprise Series hard drive
• 8TB storage capacity
• Designed for compatible Synology systems
• Suitable for demanding 24/7 storage operation
• 3.5-inch hard-drive form factor
• SATA 6Gb/s interface
• Conventional Magnetic Recording technology
• Helium-sealed drive design
• 512e sector format
• 7,200 RPM rotational speed
• 512MB buffer
• Up to 281MB/s typical sustained transfer speed
• 550TB per year workload rating
• 2,000,000-hour MTBF rating
• Persistent Write Cache technology
• More than 500,000 cumulative hours of Synology testing
• Firmware updates through Synology DSM
• Suitable for compatible RAID configurations
• Five-year limited hardware warranty

Recommended Uses

• Compatible Synology NAS and storage systems
• Enterprise file storage
• Centralised business data storage
• Server and endpoint backup
• Shared business files
• Archive and long-term storage
• Surveillance recording
• Media and project storage
• High-volume multi-user workloads
• Compatible RAID configurations
• Storage-pool expansion
• Professional NAS deployments
• Business continuity and data-protection workflows

Specifications

Compatibility Note

Please confirm that the Synology HAT5320-8T is officially compatible with your exact Synology NAS or storage system before ordering.

Compatibility may vary according to the Synology system model, hardware revision, supported drive list and installed DSM version.

The HAT5320-8T is an internal 3.5-inch SATA hard drive and requires a compatible SATA drive bay.

It is not an external USB hard drive, portable storage device, solid-state drive or complete NAS system.

The available capacity displayed by Synology DSM will be lower than the stated 8TB capacity because of storage calculations, formatting, system partitions, RAID configuration and other system requirements.

Actual transfer performance depends on the Synology system, RAID configuration, network connection, workload, other installed drives and active DSM applications.

MTBF is a statistical reliability measurement and is not a guarantee or estimate of the operating life of an individual hard drive.

RAID helps protect against selected drive failures but does not replace an independent backup.

Installation Guidance

Before installation:

• Confirm compatibility with the Synology system
• Back up important existing data
• Use suitable anti-static precautions
• Handle the drive by its sides
• Avoid touching the connector or circuit board
• Secure the drive correctly in the drive tray
• Follow the Synology hardware-installation guide

After installation:

• Confirm the drive is detected in DSM
• Check the drive-health status
• Apply supported firmware updates
• Configure or expand the storage pool
• Allow initialisation or repair operations to complete
• Maintain an independent backup

Do not remove the drive during RAID repair, storage-pool expansion, data scrubbing, firmware updates or other critical storage operations.

What’s in the Box

• 1 × Synology HAT5320-8T 8TB Enterprise Series 3.5-Inch SATA Hard Drive

A Synology NAS or storage system is not included.

Warranty

Five-Year Synology Limited Hardware Warranty

Sustainability

The Synology HAT5320-8T is RoHS compliant.

Compatible firmware updates can be managed through Synology DSM without removing the drive or connecting it to separate firmware equipment.

The drive should be recycled through an appropriate electronic-waste recycling facility at the end of its usable life.

Product Description

The RCT-A3U-U3 3.5″ USB 3.0 External Hard Drive Enclosure is designed for users who need to convert a compatible internal 3.5″ SATA hard drive into an externally accessible desktop storage device.

The enclosure supports compatible 3.5″ SATA hard drives with capacities of up to 12TB. It is suitable for desktop backups, document archives, media libraries, file transfers and repurposing compatible internal hard drives.

USB 3.0 connectivity supports data-transfer speeds of up to 5Gbps when the enclosure is used with compatible USB 3.0 computers, ports, cables and storage devices.

Because 3.5″ desktop hard drives require more power than smaller portable drives, the enclosure uses an external power adapter for stable operation. It supports 5V DC and 12V DC operating power, with a 12V power adapter included in the package.

The RCT-A3U-U3 supports compatible Windows, Linux and macOS computers, making it suitable for home, office and workstation storage environments.

Please check that your drive is a compatible 3.5″ SATA HDD and that its capacity does not exceed 12TB before ordering.

A hard drive is not included.

Key Features

• 3.5″ SATA hard drive enclosure
• Converts a compatible internal SATA HDD into external storage
• Supports compatible hard drives with capacities up to 12TB
• USB 3.0 connectivity
• Supports data-transfer speeds up to 5Gbps
• Externally powered for stable desktop hard drive operation
• Supports 5V DC and 12V DC operating power
• Compatible with supported Windows computers
• Compatible with supported Linux computers
• Compatible with supported macOS computers
• Suitable for backups and data archiving
• Suitable for photos, videos, documents and media libraries
• Useful for repurposing compatible internal SATA hard drives
• Includes a 12V power adapter
• Includes a USB 3.0 data cable
• Black desktop enclosure design
• Hard drive not included

Specifications

Compatibility

The RCT-A3U-U3 3.5″ USB 3.0 External Hard Drive Enclosure is suitable for compatible:

• 3.5″ SATA hard disk drives
• Hard drives with capacities up to 12TB
• Windows computers
• Linux computers
• macOS computers
• Desktop external storage setups
• Backup and archive workflows
• Media-storage libraries
• External drive access and file-transfer setups
• Home office storage environments
• Office and workstation storage setups

Please check your hard drive before ordering.

The enclosure is designed for compatible 3.5″ SATA hard disk drives. It is not specified for 2.5″ drives, M.2 drives, NVMe drives, SAS drives or other storage formats.

The installed hard drive must have a capacity of 12TB or less.

The enclosure must be connected to the included external power adapter for proper operation.

Actual data-transfer speed depends on the installed hard drive, computer, USB port, operating system, file sizes and connected USB equipment.

A hard drive may need to be initialised, partitioned or formatted before it can be used. Formatting can erase existing data, so important files should be backed up before making storage changes.

The hard drive is not included.

What’s in the Box

• 1 × RCT-A3U-U3 External Hard Drive Enclosure
• 1 × 12V Power Adapter
• 1 × USB 3.0 Data Cable
• 1 × Operating Manual

Sustainability

The enclosure allows a compatible internal 3.5″ SATA hard drive to be reused as external storage, potentially extending the useful life of existing storage hardware.

Its replaceable-drive design allows the enclosure and hard drive to be changed independently rather than replacing the complete storage solution.

The Transcend JetRam 32GB DDR4-2666 SO-DIMM Memory Module is designed for compatible notebooks and compact systems that support DDR4 unbuffered SO-DIMM memory.

Product Description

The Transcend JetRam 32GB DDR4-2666 SO-DIMM Memory Module is a high-capacity notebook memory upgrade for compatible DDR4 systems.

It operates at 2666MT/s with CL19 latency and 1.2V operating voltage. The 32GB capacity is suited to supported systems that require more memory for multitasking and heavier workloads.

Key Features

• 32GB DDR4 notebook memory
• Unbuffered SO-DIMM form factor
• 2666MT/s memory speed
• CL19 latency
• 2Rx8 rank organisation
• 2Gx8 component composition
• 1.2V operation
• 260-pin module
• Limited Lifetime Warranty

Specifications

Compatibility Note

Please check your notebook, mini PC or system memory compatibility before purchase. This module is intended for systems that support DDR4 unbuffered 260-pin SO-DIMM memory.

What’s in the Box

• Transcend JetRam 32GB DDR4-2666 SO-DIMM Memory Module

Warranty

Limited Lifetime Warranty

The Transcend ESD310P 1TB Portable SSD offers fast, compact storage with built-in USB-C and USB-A connectors. It is ideal for users who need portable storage for backups, files, photos, videos and daily work.

Product Description

The Transcend ESD310P 1TB Portable SSD is a compact external SSD designed for fast file transfers and simple everyday storage. Its built-in USB-C and USB-A connectors make it easy to use across compatible devices without needing an additional cable.

The supplier product master lists this model with USB 10Gbps support, up to 1050MB/s read speed and up to 950MB/s write speed. With 1TB capacity, it offers a practical balance between portability and storage space for work documents, school files, photos, videos and backup folders.

The pink finish gives the ESD310P a cleaner, more distinctive look while keeping the same compact ESD310 cable-free design.

Key Features

• 1TB portable SSD storage
• Built-in USB-C and USB-A connectors
• Compact cable-free design
• USB 10Gbps transfer support
• Up to 1050MB/s read speed
• Up to 950MB/s write speed
• Pink finish
• Suitable for file transfers, backups, photos, videos and work folders
• Ideal for compatible laptops, desktops, tablets and mobile devices

Specifications

What’s in the Box

• Transcend ESD310P 1TB Portable SSD Pink

Warranty

5-Year Limited Warranty

Warranty coverage is subject to Transcend’s official warranty terms and conditions, product usage, proof of purchase and regional support process.